problem - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro) +--- Thread: problem (/Thread-problem) Pages:
1
2
|
problem - groucho - 01-May-2024 hello,i have a devialet d200, everytime i configure a profile on my pc for it the amp does not accept it,devialet suggested a different sd card which i have done with same results,anyone fixed this issue thanks RE: problem - Peter van der Laarse - 01-May-2024 Have you read the instructions on devialet website? Firmware? SD card type? Same laptop for sd card and firmware? First the basics.... RE: problem - ray1234 - 02-May-2024 The first question comes to mind is - what format is your sdcard in? RE: problem - Axel - 02-May-2024 (01-May-2024, 16:17)groucho Wrote: hello,i have a devialet d200, everytime i configure a profile on my pc for it the amp does not accept it,devialet suggested a different sd card which i have done with same results,anyone fixed this issue thanks Hi and welcome to the forum. You might find some useful information here: https://devialetchat.com/Thread-How-to-configure-your-Expert-Pim-and-Axel-s-method t RE: problem - devianet - 02-May-2024 Also it would be helpful if you could tell us exactly what the amp says when it "does not accept it". Ironically I had exactly this problem, on reconfiguring, recently, with the amp saying "invalid configuration file, please contact devialet support". On closer inspection the dp_cfg.txt was truncated at 2kb and it was not the usual ~22kb in size. So it certainly was invalid. I carefully repeated the download process and then all was well. RE: problem - Stian_Gel - 02-May-2024 You should also try to make a brand new configuration, as editing previous ones can lead to problems. I was having problems with pre-out not turning on when i edited an older configuration. RE: problem - groucho - 02-May-2024 it was a brand new config,size is 22kb, keep getting sd card error with 2 different sd cards RE: problem - groucho - 02-May-2024 tried in ntfs format and fat 32, neither any good ,whats it supposed to be RE: problem - groucho - 02-May-2024 CRCD0EC FW_VERSION 01100100 { TARGET "D-PREMIER" HW_VERSION 01040101 { IHM "ihm_1000.hex" PSU "psu_0302.hex" HDMI "hdmi0208.hex" DUET "duet0505.hex" ADHL "adh_0303.hex" ADHR "adh_0303.hex" I2S "i2s_0308.hex" WIFI "wifi0210.hex" FPGA "fpga0503.hex" DSPD "dspd0210.hex" USB "usb_0501.hex" } HW_VERSION 01050000 { IHM "ihm_1000.hex" PSU "psu_0404.hex" HDMI "hdmi0208.hex" DUET "duet0505.hex" ADHL "adh_0303.hex" ADHR "adh_0303.hex" I2S "i2s_0309.hex" WIFI "wifi0210.hex" DSPM "dspm0803.hex" FPGA "fpga0503.hex" DSPD "dspd0210.hex" USB "usb_0501.hex" } HW_VERSION 01060000 { IHM "ihm_1000.hex" PSU "psu_0604.hex" HDMI "hdmi0208.hex" DUET "duet0505.hex" ADHL "adh_0400.hex" ADHR "adh_0400.hex" I2S "i2s_0309.hex" WIFI "wifi0210.hex" DSPM "dspm0803.hex" FPGA "fpga0503.hex" DSPD "dspd0210.hex" USB "usb_0501.hex" } RE: problem - thumb5 - 02-May-2024 The SD card must be FAT, not NTFS. You might like to try following the instructions in this thread: https://devialetchat.com/Thread-How-to-configure-your-Expert-Pim-and-Axel-s-method. It's very important that there are no files (including "hidden" files) on the SD card other than the configuration file, which must be called dp_cfg.txt. Pim and Axel's instructions help to ensure that's the case. Also, be sure not to modify the configuration file in any way - for example by opening it in a text editor and saving it - otherwise you'll invalidate the CRC and the configuration will be rejected. |