Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connect to Marantz nr1606
#1
Hello, 

Is it possible somehow to connect Phantom I 108dB to Marantz nr1606 system? Only opt connector on marantz is labeled as Input.
Reply
#2
Not certain. There is an ethernet connection on the Marantz you might try connecting that to your router or one of the speakers. I believe there are ethernet to optical converters as well. Maybe someone more knowledgeable will chime in.
iMac 2021, Roon, home wifi, Devialet Phantom I x 2
Reply
#3
HI, after looking at this https://www.marantz.com/en-us/product/av...ers/nr1606 and the back panel connections.

makes me wonder - whats Zone Audio Output: Speaker / Preout ?
If the Zone Audio Output specifically ZONE 2 what ever that is but if its a full stereo pair signal then that ZONE 2 'Preout' could be used as an Input to the ARCH.

Or if zone2 is no good - mybe an HDMI audio extractor and use the HDMI ouput into a device that gives you a SPDIF output to feed an optical input on a speaker, dialog , or arch.
Reply
#4
Hi There!
I did what you described a few years ago... here's a thread that documented my process.

https://devialetchat.com/Thread-New-Home-Theater
6 x Phantom Gold, 3 x Phantom Silver, 2 x Phantom Classic, 9 x Phantom Reactor 900, Symetrix Radius AEC-2, 2 x JBL Synthesis SDP-55, Dante
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)