+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Tweaker's Corner (https://devialetchat.com/Forum-Tweaker-s-Corner)
+--- Thread: RC measurement 7.1.1 - 7.1.3 (/Thread-RC-measurement-7-1-1-7-1-3)
Pages:
1
2
RC measurement 7.1.1 - 7.1.3 - windler - 09-May-2015
The upper graphs are 7.1.1 and the lowers are 7.1.3
RE: RC measurement 7.1.1 - 7.1.3 - Confused - 09-May-2015
Taking the graphs at face value, 7.1.3 appears to have a generally flatter frequency response but perhaps adds a touch more bass. The really interesting thing is that the bass null at just over 50hz appears to be reduced. Considering that bass in that region is, if anything, increased, then the reduction is the null is remarkable. Quite how different firmware achieves this I'm not sure.
RE: RC measurement 7.1.1 - 7.1.3 - Dr Tone - 09-May-2015
Very interesting!!
RE: RC measurement 7.1.1 - 7.1.3 - Pim - 09-May-2015
Is that a 'brick wall' at 20kHz on 7.1.3?
RE: RC measurement 7.1.1 - 7.1.3 - Music or sound - 10-May-2015
(09-May-2015, 23:44)Pim van Vliet Wrote: Is that a 'brick wall' at 20kHz on 7.1.3?
Or an artefact of the measurement tool?
RE: RC measurement 7.1.1 - 7.1.3 - NickB - 10-May-2015
My money would be on the measurement tool.
RE: RC measurement 7.1.1 - 7.1.3 - f1eng - 10-May-2015
Did you take an average over multiple measurements or just one?
RE: RC measurement 7.1.1 - 7.1.3 - windler - 10-May-2015
This is average of 9 point X 3 measurements each point
RE: RC measurement 7.1.1 - 7.1.3 - Mohmm - 11-May-2015
(09-May-2015, 19:39)windler Wrote: Just want to share with you the results of room correction measurement between 7.1.1 to 7.1.3
The upper graphs are 7.1.1 and the lowers are 7.1.3
All this variation is just due to room and comb filter effects and other slight differences between the two measurements sessions. The measuring person may have been standing at a different spot and the microphone at the consecutive nine measurements with Dirac is likely to have been laterally and/or hight-wise differently placed; some centimeters are enough for comb filters to change. One shouldn't also forget that reproducing the same background noise level is near impossible. It would be enough for the fridge to start its compressor or a car passing by. I am working with Dirac myself and have been fighting with these problems. I am convinced that a firmware upgrade does not produce any effects on the room response.
RE: RC measurement 7.1.1 - 7.1.3 - Vivialet - 11-May-2015
you will never get identical measurements. You only need to change something in the room, e.g. reorganize some stuff in a rack or moving a chair. And you will never be able to position the microphone exactly on the same 9 positions for Dirac.