Devialet Chat
110 Ohm RCA to XLR Digital - Printable Version

+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet Expert 400/800, Original d'Atelier, Expert 210/440/1000 Pro (https://devialetchat.com/Forum-Devialet-Expert-400-800-Original-d-Atelier-Expert-210-440-1000-Pro)
+--- Thread: 110 Ohm RCA to XLR Digital (/Thread-110-Ohm-RCA-to-XLR-Digital)



110 Ohm RCA to XLR Digital - Matthew - 07-Oct-2015

Hello all and good evening!

I had a fellow make a cable for me (as per thread subject), as I wanted to see if it was better than the 75 ohm cable I use (that was used with my sub before I sold it).

It's kind of odd but it seems that anything of a higher bitrate and the sound starts to, or completely cuts out of, the companion side of the system.  I'd say about anything over 4500 kbps (via JRiver).  CD Rips play absolutely fine.

I'm glad I only paid $80 for the cable but was wondering if there is any reason (apart from a faulty cable - but even then I would have thought it would work or...not), that this might happen?  I double checked all my settings in the configurator.  When I go back to the configuration with the 75 ohm cable and use it, now problem at any bitrate.

Thanks!!


RE: 110 Ohm RCA to XLR Digital - baddog - 08-Oct-2015

I use a 110 Ohm cable - RCA to XLR with out any problems at all, Redbook, DSD, 24/192 all play without a hitch. The cable is made by DH Labs, a D-110 that I had them modify to include an RCA connector on one end. Highly recommended by me.

So I would say the issue is with the cable that was made for you.

This is to connect my master 200 with the companion 200.


RE: 110 Ohm RCA to XLR Digital - Matthew - 08-Oct-2015

(08-Oct-2015, 04:15)baddog Wrote: I use a 110 Ohm cable - RCA to XLR with out any problems at all, Redbook, DSD, 24/192 all play without a hitch. The cable is made by DH Labs, a D-110 that I had them modify to include an RCA connector on one end. Highly recommended by me.

So I would say the issue is with the cable that was made for you.

This is to connect my master 200 with the companion 200.

Thanks for the confirmation!