New versions of Spark 1.3.1 and firmware 1.4.1.12 - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: New versions of Spark 1.3.1 and firmware 1.4.1.12 (/Thread-New-versions-of-Spark-1-3-1-and-firmware-1-4-1-12) |
RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - karebe - 11-Nov-2015 (11-Nov-2015, 21:54)Jamington2004 Wrote:(11-Nov-2015, 20:06)Krisp Wrote: If you would live in the countryside a Ferrari will surely not perform on a pebble road and you will have to find your specific solution to make full use of your sportscar, whatever this solution might look like. Maybe this metaphorical car would be an alternative :-) RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - karebe - 11-Nov-2015 If you see both devices when old and new routers are connected than all devices are in the same network. You simply use switching functionality of your old one. The old and new wifi have the same name I guess and so the devices try to jump from one wifi to the other one. The DHCP server is most probably on both routers. You have created an interesting configuration. Which more or less works accidentally. As I said for the first step try a switch. RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Jamington2004 - 12-Nov-2015 (11-Nov-2015, 22:59)karebe Wrote: If you see both devices when old and new routers are connected than all devices are in the same network. You simply use switching functionality of your old one. Ok - I don't really get any of this! So how do I make sure the dialogue is on its own network as suggested by Devialet? On my devices I now see 2 networks with different names - the main router which phones iPads and laptops are connected to - and the 2ndary router which the dialogue is connected to via Ethernet So if I am controlling Spark on my iPhone on the main router - but the dialogue is on the second router what is happening All I know is that for now it's stopped any cut outs! And last 2 days - no issues with devices dropping off main router (I hope this lasts!!!) RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - karebe - 12-Nov-2015 (12-Nov-2015, 12:25)Jamington2004 Wrote:If your are controlling with Spark on your iPhone the data flow to your main router and from it via Ethernet to your old router and to Dialog which is Ethernet connected. Same way back.(11-Nov-2015, 22:59)karebe Wrote: If you see both devices when old and new routers are connected than all devices are in the same network. You simply use switching functionality of your old one. When you talk about two different networks. Do you mean wifi network names or the name of your routers? Actually an Ethernet network has no name. RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Jamington2004 - 12-Nov-2015 (12-Nov-2015, 12:56)karebe Wrote: If your are controlling with Spark on your iPhone the data flow to your main router and from it via Ethernet to your old router and to Dialog which is Ethernet connected. Same way back. Ah ok so it's still going to my main router from my iPhone! Grrrr When I talk about 2 networks yes I mean SSID on the router which shows up under wifi connections on devices Anyway - next update, I managed to get the router settings on the 2ndary router and disabled wifi to see if it would stop devices dropping of of primary router So now I have Main Router (wifi enabled) -ethernet to 2nd Router (with wifi disabled) - Ethernet to Dialogue - wifi to Phantoms I though this would finally keep everyone happy - but alas for some weird reason beyond me, my sons iPhone 4s keeps dropping off the 2.4ghz signal from the primary router We were both there refreshing our phones (mine is 5s) and both connected to the 2.4ghz signal and every 30 seconds his would disconnect momentarily then recconnect itself a few secs later. I turned off the 2ndary router - and it kept happening! I unplugged the Ethernet cable between the routers......and it stopped happening Aaaaaaggggghhhhhh! Thanks for any advice you may have on this RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Teliaved - 12-Nov-2015 Hi Have a look at section 5.1 and 5.2, the drawings should suffice https://help.devialet.com/hc/en-us/articles/203427491-Set-up-recommended Regards RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Jamington2004 - 12-Nov-2015 (12-Nov-2015, 22:52)Teliaved Wrote: Hi Thanks So the only difference there to the set up I mentioned in my last post is that I am using a wifi disabled Virgin router instead of the Airport So this is better because it has a LAN port to connect the Dialogue? And would you be confident this would stop devices connected to the main router being affected? This is my sole remaining issue. (Before I spend my hard earned buying one ) many thanks Jamie RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Jamington2004 - 13-Nov-2015 Fuck it - just splashed out on an airport express! I guess I don't need to understand it right? So far so bloody amazing And it's also fixed an issue with Spark taking a few seconds to connect each time i toggle to it Now it snaps straight in so I can mute much quicker!!! Halle bloody lujha! (He says - wondering if he should have waited a few days before posting!!!) RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Teliaved - 13-Nov-2015 Glad pointing to this resource helped. I have no phantoms for now - it is just a question of time and money, but I am surprised so many people have issues with their networks and so few look u at Devialet's Web site assistance phantom network. Hey, maybe not reading the manual is part of the fun. Anyway, I will also include airport in the setup from day 1. Regards RE: New versions of Spark 1.3.1 and firmware 1.4.1.12 - Jamington2004 - 13-Nov-2015 Fair point. But the thing that put me off the scent is that I had no issues for the first month or so (a few reboots here and there) then the issues suddenly got worse - before and after the latest update So human nature will then blame the Phantoms / Dialogue (they worked once with my set up so something must have gone wrong with a change to the software). After all I have a super fast cable broadband and just a few phones connected to a really strong router. And during loads of discussions (mostly me adding loads of scenarios and tests and waiting for them to reply).....only once right at the very end did they suggest to try the phantoms on a a dedicated network (didn't mention Apple airport until after I still issues with an additional wireless disabled virgin router) Otherwise they went straight to telling me to wire the speakers in with Ethernet cables (which is not at all feasible for me to do (and a big one of the many reasons I bought them) Why oh why don't they just build the required router functionality into the Dialogue in the first place? For me this is still Devialets problem to sort out if they can't get the speakers to work without an Apple Airport express on a set up like mine But - I am past caring If my problems are fixed then I back to loving the speakers more than anything else I have ever owned........ Even if slightly frustrated by the experience of it all |