Default Setting - DPM, SAM - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro) +--- Thread: Default Setting - DPM, SAM (/Thread-Default-Setting-DPM-SAM) |
Default Setting - DPM, SAM - jmorrell - 09-Mar-2016 Hi guys, Nice to meet you all I'd like to to turn DPM off be default - I can't find a setting for it in the configurator. When set it to 'off' using the remote and turn the d200 off and back on the setting is restored to 'on'. Secondly and quite similar to the previous question. Is is possible to enable SAM on the configurator so the option is there but have it 'off' by default. This would allow me to enable SAM using the remote. If i disable SAM in configuration it doesn't carry any of the sam parameters across to the cfg file. Any thoughts? Best wishes, jmorrell RE: Default Setting - DPM, SAM - Dr Tone - 09-Mar-2016 Turn it off in the configurator. Power Savings accordion in "General Settings" RE: Default Setting - DPM, SAM - jmorrell - 09-Mar-2016 (09-Mar-2016, 16:27)Dr Tone Wrote: Turn it off in the configurator. Power Savings accordion in "General Settings" Got it. Not sure how i missed it. Thanks for that, great help RE: Default Setting - DPM, SAM - jmorrell - 09-Mar-2016 SAM problem solved by enabling it. Then turning the SAM volume down to 0 on the remote - This seems to save at 0 despite being cycled through standby , or power off/on. Voila! thanks |