+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro)
+--- Thread: Toslink input flashing. (/Thread-Toslink-input-flashing)
Toslink input flashing. - wfveennl - 23-Jul-2016
Hello,
I have hooked up my TV setup box with toslink cable to the toslink input of my 200 and this worked just fine before. I have not used it for awhile and now when I try to play back via toslink the input on my 200 is flashing but no sound. When I remove the cable the input indicator changes to red. There are no options in the setup box and it should just work.
Does anybody know why the flashing input indicator means? I look for the manual of the manula of the firmware but was not able to find the answer to my question.
Best regards,
Willem.
RE: Toslink input flashing. - canyelles - 23-Jul-2016
Are you sure the TV is outputting PCM?
Check the TV sound menu
RE: Toslink input flashing. - wfveennl - 23-Jul-2016
(23-Jul-2016, 19:49)canyelles Wrote: Are you sure the TV is outputting PCM?
Check the TV sound menu
Thanks for your reply. Like I mentioned, there are no settings in the setup box, the toslink output is "always on". I can even see light in the cable.
RE: Toslink input flashing. - Les Anderson - 27-Jul-2016
Wild educated guess is that the cable box is outputting Dolby digital and not stereo pcm. There has to be a settings menu somewhere. If not, run toslink off of your tv and set it to output w ch pcm.
If all else fails, run a known good source into the 200 like a dvd or CD player to ensure the issue with not with the devialet. If this test passes, you need to go back and adjust the equipment in front of it.
I have never heard of a cable box that doesn't offer audio settings.
RE: Toslink input flashing. - hk6230 - 28-Jul-2016
(23-Jul-2016, 19:40)wfveennl Wrote: Hello,
I have hooked up my TV setup box with toslink cable to the toslink input of my 200 and this worked just fine before. I have not used it for awhile and now when I try to play back via toslink the input on my 200 is flashing but no sound. When I remove the cable the input indicator changes to red. There are no options in the setup box and it should just work.
Does anybody know why the flashing input indicator means? I look for the manual of the manula of the firmware but was not able to find the answer to my question.
Best regards,
Willem.
When it is flashing, it means the connection is loose. Check your cabling. Adjust during playback until you can see the display turns white.
RE: Toslink input flashing. - wfveennl - 29-Jul-2016
(28-Jul-2016, 08:21)hk6230 Wrote:(23-Jul-2016, 19:40)wfveennl Wrote: Hello,
I have hooked up my TV setup box with toslink cable to the toslink input of my 200 and this worked just fine before. I have not used it for awhile and now when I try to play back via toslink the input on my 200 is flashing but no sound. When I remove the cable the input indicator changes to red. There are no options in the setup box and it should just work.
Does anybody know why the flashing input indicator means? I look for the manual of the manula of the firmware but was not able to find the answer to my question.
Best regards,
Willem.
When it is flashing, it means the connection is loose. Check your cabling. Adjust during playback until you can see the display turns white.
Eventhough I did disconnect and connect the cable several times, I took it out and put it back again and now it indeed works again!
Thanks to all who replied and case closed!