+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: What The Polls Say (https://devialetchat.com/Forum-What-The-Polls-Say)
+--- Thread: Tone controls (/Thread-Tone-controls)
RE: Tone controls - Rodney Gold - 02-Mar-2015
I agree, The tone controls should not have been configured as they are , the filters should have been parametric which would be MUCH more useful
RE: Tone controls - Stigmater - 12-Apr-2015
Tried to play with Tone control in Devialet configurator to tweak a little my Magico S1 in the lower part,
no matter what parameters i used, the end result was adding very unpleasant distortion .
Is it only me with such issues or some other members share my insights?
RE: Tone controls - Pim - 13-Apr-2015
Can you eleborate on 'distortion' a bit more? All I notice is a change in lows and highs.
Tone controls - Stigmater - 05-May-2015
Switched to YG Carmel and tone control is working like it should now.
Sent from my iPhone using Tapatalk
RE: Tone controls - Pim - 05-May-2015
(05-May-2015, 14:54)Stigmater Wrote: Switched to YG Carmel and tone control is working like it should now.
Sent from my iPhone using Tapatalk
Happy?
RE: Tone controls - Damon - 06-May-2015
I am using the tone controls, with the treble currently boosted to +3.5. However, that is with the current speakers, the GamuT Phi5 kmII. I might not boost the treble with the other speakers in my collection. I do like the Devialet for this; the tone adjustment is in the software, rather than in hardware with physical movement in controls. I also like that we can adjust the frequency that the treble and bass affect. Yes, I suppose a parametric EQ would be nice, but I think it would be as much of a distraction as a useful tool. BTW, I have the treble adjusted, so I 'use' the tone control, but I don't change it. It is set, and I leave it unless I change speakers. Maybe not even then.
The pre-amplifier is supposed to take the input signal, convert it into the appropriate form (ADC or DAC), allow volume control, and then have the power amp amplify the signal without altering it... or so they say. Whatever. I think the tone controls are good, and valuable. If the upstream signal is pure, we should not need to adjust tone. But, since recordings vary, and speakers vary, and cables and shelves affect sound, and we all (or most of us) have rooms with furniture, or reflective walls, then the ability to edit the sonic signature is a good option. Says I.
RE: Tone controls - baconbrain - 06-May-2015
(02-Mar-2015, 15:37)Rodney Gold Wrote: I agree, The tone controls should not have been configured as they are , the filters should have been parametric which would be MUCH more useful
ditto
RE: Tone controls - Hifi_swlon - 25-May-2015
Use them. Glad to have them. Don't notice sound degradation unless pushed hard which I would expect. Wish all amplifiers had them.
Don't like the implementation. Even if not parametric, at least let you change the frequencies via remote! What idiot thought of the current methodology!
RE: Tone controls - pthierry - 30-May-2015
I'm the happy owner of a Devialet 120 since one week now, I tried to use the tone controls but I encounter a strange issue in the following scenario:
SAM is enabled
SAM is set to 0 % (meaning it does not add any bass at all)
Increasing the bass with the tone control for a few dB on a bass-heavy track introduces an horrible distortion, regardless of the volume setting (i.e. the saturation doesn't come from the speakers)
If I do the same with SAM disabled on the exact same track, I can go up to 18dB with the bass without introducing distortion ! (Although the bass are of course extremely boomy)
I reported the problem to Devialet, I'm awaiting their answer... Anyone experienced the same ?
I'm currently using f/w 7.1.3, because the 8.0 is unusable with SAM on my speakers (BW 683 S2). Devialet is aware of the issue...
RE: Tone controls - goflyshirley - 27-Dec-2015
I use them all the time to equalize old recordings... a little extra bass here and there. I imagine people that hear distortion from doing this is because they are overdoing it.