Photo of attachment 'lock' on Tree or Gecko? - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: Photo of attachment 'lock' on Tree or Gecko? (/Thread-Photo-of-attachment-lock-on-Tree-or-Gecko) |
Photo of attachment 'lock' on Tree or Gecko? - MountainGuy - 19-Nov-2016 Would anyone be kind enough to provide a close up photo of the attachment 'lock' (for lack of a better word) on either the Tree or the Gecko to the Phantom's little metal bolt in the center of the base? I am considering making a custom base for the Phantom and will share here if I do. Thanks! RE: Photo of attachment 'lock' on Tree or Gecko? - ragwo - 20-Nov-2016 Not exactly what you are looking for, but it's a solution that works well. EvPa's creation: http://devialetchat.com/showthread.php?tid=3541&pid=50410#pid50410 RE: Photo of attachment 'lock' on Tree or Gecko? - ASH1976 - 23-Nov-2016 (19-Nov-2016, 22:07)MountainGuy Wrote: Would anyone be kind enough to provide a close up photo of the attachment 'lock' (for lack of a better word) on either the Tree or the Gecko to the Phantom's little metal bolt in the center of the base? I am considering making a custom base for the Phantom and will share here if I do. Dont have the exact pic of the locking design of the Tree, but i made 2 stainless steel clamps on my base for fitting. Its not accurate but wouldnt allow the Phantom to be toppled off !!! if you need the design, let me know!!!! RE: Photo of attachment 'lock' on Tree or Gecko? - Jamington2004 - 26-Nov-2016 (19-Nov-2016, 22:07)MountainGuy Wrote: Would anyone be kind enough to provide a close up photo of the attachment 'lock' (for lack of a better word) on either the Tree or the Gecko to the Phantom's little metal bolt in the center of the base? I am considering making a custom base for the Phantom and will share here if I do. Just been to Harrods and took this for you of the gecko plate Looks like a spring loaded clamp at the back and then a hole for the phantoms hook to slide into on the front RE: Photo of attachment 'lock' on Tree or Gecko? - MountainGuy - 27-Nov-2016 Thank you! Much appreciated. Looks a bit more involved than I thought with the spring. RE: Photo of attachment 'lock' on Tree or Gecko? - Jamington2004 - 27-Nov-2016 (27-Nov-2016, 05:07)MountainGuy Wrote: Thank you! Much appreciated. Looks a bit more involved than I thought with the spring. I think probably the spring is superfluous - especially if you have it angled down in anyway the weight will be towards the hook mechanism so unless someone tried to rip it out with force? RE: Photo of attachment 'lock' on Tree or Gecko? - nigelb001 - 28-Nov-2016 (27-Nov-2016, 11:26)Jamington2004 Wrote:(27-Nov-2016, 05:07)MountainGuy Wrote: Thank you! Much appreciated. Looks a bit more involved than I thought with the spring. I have Geckos and would not like to hang my Phantoms six foot in the air without the spring mechanism. there is even a screw on the underside to lock it in place. With this mechanism it is rock solid. So essential not superfluous in my reckoning RE: Photo of attachment 'lock' on Tree or Gecko? - alandbush - 29-Nov-2016 Stumbled upon the following measurements. http://www.easylounge.com/Content/photos/d/e/devbranchblanc,83687-1200px.jpg |