master / slave digital cable for 440Pro - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet Expert 400/800, Original d'Atelier, Expert 210/440/1000 Pro (https://devialetchat.com/Forum-Devialet-Expert-400-800-Original-d-Atelier-Expert-210-440-1000-Pro) +--- Thread: master / slave digital cable for 440Pro (/Thread-master-slave-digital-cable-for-440Pro) |
master / slave digital cable for 440Pro - Wdw - 09-Dec-2016 Hello All, Just took delivery of the upgraded 400 and have a quick question. Tried a search but couldn't unearth a comment I thought I had read concerning the new cable offered with the upgrade, I seem to recall a post stating the new master/slave digital cable is an Audioquest Carbon replacing the Crystal I had for the 400s. The upgrade has the same Crystal...no worries just wondering if I am mistaken (a reasonable hypothesis) or they have run out of the newer cables. The upgrade, just dead cold and straight out of the box is really exceptional. A major improvement in speed, stage, definition and energy. I am surprised how relatively tame the posted reviews have been. besy wdw master / slave digital cable for 440Pro - Xander - 09-Dec-2016 I received also the Crystal... RE: master / slave digital cable for 440Pro - baddog - 09-Dec-2016 +3 here! RE: master / slave digital cable for 440Pro - Wdw - 09-Dec-2016 (09-Dec-2016, 19:58)baddog Wrote: +3 here! Thanks all...must be my groggy ole head mixing things up somewhere all the way...so Crystal it is. Anyone use a Nordost rca to rca to good effect? Say Heimdall or better. RE: master / slave digital cable for 440Pro - baddog - 09-Dec-2016 Warren - using a XLR - RCA connection from DH Labs - so cannot provide any recommendations for an RCA - RCA solution. p.s. glad to hear you got your system back, safe and sound in one piece! RE: master / slave digital cable for 440Pro - Wdw - 09-Dec-2016 (09-Dec-2016, 21:29)baddog Wrote: Warren - using a XLR - RCA connection from DH Labs - so cannot provide any recommendations for an RCA - RCA solution. Thanks Barr, the upgrade is truly extraordinary. I don't understand why RCA to XLR would be of any benefit. I have a Heimdall XLR digital and asked Nordost to alter it to suit and they thought I was crazy. RE: master / slave digital cable for 440Pro - Wdw - 09-Dec-2016 (09-Dec-2016, 21:29)baddog Wrote: Warren - using a XLR - RCA connection from DH Labs - so cannot provide any recommendations for an RCA - RCA solution. Thanks Barr, the upgrade is truly extraordinary. I don't understand why RCA to XLR would be of any benefit. I have a Heimdall XLR digital and asked Nordost to alter it to suit and they thought I was crazy. RE: master / slave digital cable for 440Pro - baddog - 09-Dec-2016 Warren - I concur - I am very pleased with my upgraded unit. The reason I use the XLR - RCA cable is buried somewhere in these forums, I believe it all started way back when someone at Devialet stated that a XLR - RCA connection was the optimal connection between master and companion. I have seen various threads on here discussing it which is why I went that direction. Honestly no longer recall how much if any of a sound comparison I did. Also one does sacrifice some functionality if one goes down the XLR - RCA path. I think if you are happy with your sound, no need to switch from XPR - RCA and perhaps there is a better RCA - RCA cable out there. I know lots of folks here have experimented with the cables. RE: master / slave digital cable for 440Pro - Wdw - 09-Dec-2016 (09-Dec-2016, 23:12)baddog Wrote: ......think if you are happy with your sound, no need to switch...... you crazy? you mean stop upgrading, obsessing and agonizing about all this stuff...get outta here! :-) RE: master / slave digital cable for 440Pro - baddog - 09-Dec-2016 Hah hah - I had the Acoustic Revive LAN Isolator, but I sold it before I got my Devialets. Where do you connect yours? |