DEVIALET now Roon Ready. - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet News (https://devialetchat.com/Forum-Devialet-News) +--- Thread: DEVIALET now Roon Ready. (/Thread-DEVIALET-now-Roon-Ready) |
RE: DEVIALET now Roon Ready. - Pim - 20-Feb-2019 (20-Feb-2019, 00:43)David A Wrote:(19-Feb-2019, 23:21)PeppaPig Wrote:(15-Feb-2019, 14:10)Axel Wrote: I like the new RAAT implementation, although I can’t tell much difference in SQ compared to Roon Air. Piggy, It also only shows when there's a change in bass, treble etc. When everything is set to 0 it won't show up. RE: DEVIALET now Roon Ready. - Axel - 20-Feb-2019 (19-Feb-2019, 23:21)PeppaPig Wrote:(15-Feb-2019, 14:10)Axel Wrote: I like the new RAAT implementation, although I can’t tell much difference in SQ compared to Roon Air. As @David A and @Pim have pointed out, you need to be using RAAT and have the balance, bass, treble and SAM set to a value other than zero. I have my Devialet connected via DHCP and Ethernet. Also make sure that your D is running the latest software, that Roon is up to date and you have RAAT selected in Roon>Settings>Audio. Hope you get it working OK DEVIALET now Roon Ready. - PeppaPig - 20-Feb-2019 (20-Feb-2019, 04:38)Axel Wrote:(19-Feb-2019, 23:21)PeppaPig Wrote:(15-Feb-2019, 14:10)Axel Wrote: I like the new RAAT implementation, although I can’t tell much difference in SQ compared to Roon Air. Mine is using RAAT, but I am running the Roon Core for NAS. Not sure if it’s a cut down version? RE: DEVIALET now Roon Ready. - Pim - 20-Feb-2019 (20-Feb-2019, 09:14)PeppaPig Wrote:(20-Feb-2019, 04:38)Axel Wrote:(19-Feb-2019, 23:21)PeppaPig Wrote: Hi mate, how do you get those Devialet settings displayed in the signal path?? Such as SAM percentage, Bass... mine doesn’t show these details. Have you tried changing bass or treble? RE: DEVIALET now Roon Ready. - G51 - 20-Feb-2019 If change on the phase at Devialet to '-', it will be shown as 'inverted phase' in the roon signal path. And maybe I also tried changed 'icm','dpm' to 'ON', it also shown a 'dsp' at the signal path with 'unknown dsp'. Interesting. DEVIALET now Roon Ready. - PeppaPig - 20-Feb-2019 (20-Feb-2019, 09:17)Pim Wrote:(20-Feb-2019, 09:14)PeppaPig Wrote:(20-Feb-2019, 04:38)Axel Wrote: As @David A and @Pim have pointed out, you need to be using RAAT and have the balance, bass, treble and SAM set to a value other than zero. I have my Devialet connected via DHCP and Ethernet. Yes Pim, I changed the bass and it does reflect to the signal Path. Somehow my Roon still showing uncertified, even I restarted the Roon Server. Any idea? RE: DEVIALET now Roon Ready. - NickB - 20-Feb-2019 (20-Feb-2019, 13:32)PeppaPig Wrote:(20-Feb-2019, 09:17)Pim Wrote:(20-Feb-2019, 09:14)PeppaPig Wrote: Mine is using RAAT, but I am running the Roon Core for NAS. Not sure if it’s a cut down version? I powered off my Devialet by unpluggung the power cord and restarted it and then it became certified. RE: DEVIALET now Roon Ready. - Soniclife - 20-Feb-2019 (20-Feb-2019, 14:32)NickB Wrote: I powered off my Devialet by unpluggung the power cord and restarted it and then it became certified. That worked for me as well. RE: DEVIALET now Roon Ready. - David A - 20-Feb-2019 (20-Feb-2019, 16:33)Soniclife Wrote:(20-Feb-2019, 14:32)NickB Wrote: I powered off my Devialet by unpluggung the power cord and restarted it and then it became certified. I just tried that, again, and it didn't' work this time for my 140 just as it didn't work last time I did that. I've also tried restarting Roon a few times, rebooting the server which also restarts Roon after the reboot, and rebooting my router. Despite all of that my 140 still stubbornly shows the Uncertified label though everything works just fine. RE: DEVIALET now Roon Ready. - Pim - 20-Feb-2019 Most people tell me I'm 'certified' so I kind of like the uncertified situation. It gives me a bit of comfort. |