"dp_cfg.txt" Library - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Tweaker's Corner (https://devialetchat.com/Forum-Tweaker-s-Corner) +--- Thread: "dp_cfg.txt" Library (/Thread-dp-cfg-txt-Library) |
"dp_cfg.txt" Library - amabrok - 18-Dec-2014 Following the discussion we had in this thread http://devialetchat.com/Thread-Master-slave-link?page=18 i am starting this thread as a library where members can share a brief description of properly functioning config files. Others who have the same system and would like to use the same config files can reach out on PM and ask for copy by email RE: "dp_cfg.txt" Library - f1eng - 18-Dec-2014 copied from my post 25 in the Yet another Dual Mono Configuration Glitch! thread I have configuration files for D800 with the following inputs:_ Master Air labelled iMac Default MM input (I use a matching transformer with my MC cartridge) labeled Goldmund. Ethernet USB bypass input labelled TV AES labelled Mimesis 36+ SPDIF labelled Control 15 Optical 1 labelled A&K 240 Companion Analogue input default gains, labelled Lynx Theta Sub output with maximum gain (my sub has to live with 109dB/watt mains) Anybody wanting use of these input (or less I don't use the ethernet or USB myself) is welcome to a copy of this config which works fine here. The biggest limitation would you would have to change your wifi network name and password to mine... RE: "dp_cfg.txt" Library - IanG-UK - 18-Dec-2014 I've done lots of 800 dual mono configs to support 5 different speakers with or without a subwoofer; plus one active speaker I thought about; plus 2 SAM speakers; plus electrostatic headphones; with quite a few inputs. The dual mono configurator with the RCA/XLR link doesn't currently work without using a workaround; plus (though probably not a config issue) I get white noise on both wifi and ethernet fed from a MacBook Pro. 1 Transducers (a) passive loudspeakers (i) Magico Q1: 46Hz - 25kHz @+-3db and 39Hz @-6dB (ii) KEF LS50: 79Hz - 28kHz @+-3dB and 47Hz @-6dB (iii) CML Etude: not disclosed (iv) Boenicke W5: not disclosed (v) Rogers LS3/5a: 68Hz - 20kHz @+-3dB and 55Hz @-6dB (b) active loudspeakers (i) Pluto Ultimate: 40Hz - 16kHz @+-3dB and 32Hz @-6dB © active subwoofer via amplifier (i) Wilson Benesch Torus: 10Hz - 150Hz @not disclosed and 18Hz @-6dB (d) SAM loudspeakers (i) Magico Q1: 16Hz @-6dB (ii) KEF LS50: 29Hz @-6dB (e) electrostatic headphones via amplifier (i) Stax SR009 2 Configurations/Crossovers to deploy 1 Q1 or LS50 with Torus; or alone (a)(i) or (a)(ii) plus ©(i): 4th order high pass and low pass 45Hz/55Hz; or (a)(i) or (a)(ii) alone with no filtering 2 Etude or W5 or LS3/5a with Torus; or alone (a)(iii) or (a)(iv) or (a)(v) plus ©(i): 4th order high pass and low pass 60Hz/75Hz or (a)(iii) or (a)(iv) or (a)(v) alone with no filtering 3 Pluto with Torus; or alone (b)(i) plus ©(i): 4th order high pass and low pass 30Hz/35Hz or (b)(i) alone with no filtering 4 SAM Q1 with Torus; or alone (d)(i) plus ©(i): low pass 30Hz or (d)(i) alone with no filtering 5 SAM LS50 with Torus; or alone (d)(ii) plus ©(i): low pass 30Hz or (d)(ii) alone with no filtering 6 Q1 or LS50 or Etude or W5 or LS3/5a; or headphones (e) plus any (a): passive loudspeaker plus electrostatic headphones 7 SAM Q1 alone simplified (d)(i) alone with no filtering 4 Common settings - changes from default 1 - advanced configurator 2 - device = 800 3 - description = custom (NO LONGER DEFINABLE) 4 - chaining settings = chaining input, not shared sources 5 - chaining link = aes/ebu slave 6 - sub on slave = pre-out stereo 7 - general settings, remote: button 2 = pre-out; remote count = 2 CANNOT DO STEP 7: REMOVE COMPANION, ADD 250, GO TO STEP 4 8 - aes/ebu name = CYRUS CD 9 - line 1 name = QUAD TUNER; max level = 1.0Vrms 10 - optical1 name = PURE RADIO 11 - optical 2 name = MACBOOK PRO DSP 12 - usb name = DSPEAKER 13 - ethernet name = MACBOOK PRO(E) 14 - wifi name = MACBOOK PRO(A); password = xxxxxxxxx 15 - digital 2 = disabled 16 - phono 2 = disabled Anyone wanting any one of these just ask. Again the wifi is based on my network name and password. RE: "dp_cfg.txt" Library - amabrok - 19-Dec-2014 D400 Dual Mono Configuration * Master/Slave Link: RCA-RCA * General Settings: 01-General (all default except Use Last is off and Startup Source is set to USB) 02-Display: Default 03-Balance & Tone Control: Default * Remote Settings: Default * Master Inputs Setting: 01- Wifi: On (all default setting except Devialet Name set to MyD400, and network SSID and PW set to my network) 02- Brown Noise: On (Default) 03- Ethernet: Off 04- USB: On (Default) 05- Optical 1: Off 06- Phono 2: Off 07- Line 1: On (Default) 08- Digital 2: On (Default) 09- AES/EBU: Off 10- Optical 2: Off 11- Trig In: Off * Slave Inputs Setting: Sharing input disabled *Speakers: 01- Mono/Stereo: Mono (Default) 02- SAM: None |