+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet Expert 400/800, Original d'Atelier, Expert 210/440/1000 Pro (https://devialetchat.com/Forum-Devialet-Expert-400-800-Original-d-Atelier-Expert-210-440-1000-Pro)
+--- Thread: "no Link" when I try to set up Expert Pro 440 (/Thread-no-Link-when-I-try-to-set-up-Expert-Pro-440)
"no Link" when I try to set up Expert Pro 440 - markko - 05-Apr-2023
I have a 220 Pro, just got a second one, get a message "no link" when I connect them. Have tried a lot of ways to set up- new firmware, multiple new config tries, switching units, etc. Still unable to make it work. Has anyone had this happen, know a solution? Do I need a special cord ord to connect them? Thanks so much.
"no Link" when I try to set up Expert Pro 440 - disarmamant - 06-Apr-2023
What cable are you using to connect the two amplifiers?
How have you set up the connection in the configurator, the default setting is a short 75ohm coaxial cable with RCA plugs on each end?
RE: "no Link" when I try to set up Expert Pro 440 - markko - 06-Apr-2023
(06-Apr-2023, 13:56)disarmamant Wrote: What cable are you using to connect the two amplifiers?
How have you set up the connection in the configurator, the default setting is a short 75ohm coaxial cable with RCA plugs on each end?
I am using a standard S/PDIF cable. I bought the units separately. I will get that cable- is there the best way to get it? Thanks so much for your help.
RE: "no Link" when I try to set up Expert Pro 440 - markko - 06-Apr-2023
I used the default setting in the configurator when you click add a Devialet. I reset both units to factory config, downloaded latest firmware and separate SD cards for master and companion. Thanks again.
"no Link" when I try to set up Expert Pro 440 - disarmamant - 06-Apr-2023
(06-Apr-2023, 14:57)markko Wrote: I am using a standard S/PDIF cable.
That cable should work OK as it should be 75ohms characteristic impedance.
Are both the amplifiers running the same firmware version?
RE: "no Link" when I try to set up Expert Pro 440 - markko - 06-Apr-2023
I believe so. I re-installed the firmware on both. Is there a way to check on the units?
RE: "no Link" when I try to set up Expert Pro 440 - markko - 06-Apr-2023
Yes- same firmware. Thanks
RE: "no Link" when I try to set up Expert Pro 440 - thumb5 - 06-Apr-2023
Hello markko.
Just to be sure: are you loading different configuration files on the two units, one for master and the other for companion? And are you sure there are no other files on the SD cards? What does the display show on each unit when starting up and loading the configuration file?
RE: "no Link" when I try to set up Expert Pro 440 - Pim - 06-Apr-2023
https://devialetchat.com/Thread-How-to-configure-your-Expert-Pim-and-Axel-s-method
RE: "no Link" when I try to set up Expert Pro 440 - markko - 07-Apr-2023
I was incorrect- firmware needed an update. I have updated and things are working well now. Your advice was totally spot on. Thanks so much!