Posts: 39
Threads: 3
Joined: May 2016
Reputation:
0
Hi
I've taken this opportunity to upgrade to my 200 to a 400.
It arrives tomorrow and just wanted to prepare the config
Do you need to load the same config file on both sd cards or just on the master sd card?
Thanks in advance
Posts: 50
Threads: 4
Joined: Jul 2014
Reputation:
1
(17-Aug-2016, 12:15)miles Wrote: Hi
I've taken this opportunity to upgrade to my 200 to a 400.
It arrives tomorrow and just wanted to prepare the config
Do you need to load the same config file on both sd cards or just on the master sd card?
Thanks in advance
Get over to your existing config on the Devialet site. You can "add a Devialet" to your existing config; make sure you have them set as mono, one for each channel. Also note the speaker terminals to use, the mono config uses only the amps' red terminals. Once you've set up your new config you can download the files. There are download links next to each unit, so you'll have one each for the Master and Slave/Companion.
So, in short, they take separate config files. Enjoy your new toy
GorbeSE/SME 309/DV XX-2 & Roon Rock (NUC) > D400 > Wilson Benesch Vectors
Posts: 964
Threads: 10
Joined: Jul 2015
Reputation:
15
FWIW, the Devialet 400 I got in the US has a pretty standard power cord, nothing special with it as far as I can tell.
So pretty much any power cord works with it. What may not work is depending on the chord, if it is exceptionally large on the end that connects to the Devialet, you may not be able to put the rear cover plate back on.
YMMV.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
Posts: 39
Threads: 3
Joined: May 2016
Reputation:
0
thanks for all the tips
setup was as absolute breeze
took no longer than a few minutes
sounding superb