Posts: 243
Threads: 25
Joined: Jun 2014
Reputation:
4
Friend is planning to bring over a poweramp with balanced XLR inputs only to try out with my D440.
I tried configuring the 2 AES outputs as Preout, but it seems it can only be activated if I also configure 2 RCA outputs as preout.
Since I have not tested it I am not sure if it will work.
Can anyone confirm if the 2 AES outputs works as preout
Kondo Overture PM-2i, Weiss DAC502, LP12 Haben, Aro, Keel, Radikal, Urika, EMT JSD6, Phasemation PP-300/T-300, Linn Krystal, Penaudio Serenade Signature
Kondo Operia SPs 2.7, KSL-VzII, Acz-Avocado, etc.
Posts: 292
Threads: 3
Joined: Dec 2014
Reputation:
8
I think the AES are only inputs for digital. Analog outputs only RCA
Gesendet von iPad mit Tapatalk
Posts: 2,351
Threads: 32
Joined: Jun 2014
Reputation:
84
(05-Sep-2018, 06:37)Elztalbiker Wrote: I think the AES are only inputs for digital. Analog outputs only RCA
Gesendet von iPad mit Tapatalk
That's right. I just checked on the configurator.
Lifetime Roon, Mac mini, int. SSD, ext. HDD, tv as monitor, key board and track pad on bean bag as remote,Devialet 200, Od'A #097, Blue jeans speaker cable,
Dynaudio C1 MkII.
Jim Smith's GBS.
Northern NSW Australia.
Posts: 243
Threads: 25
Joined: Jun 2014
Reputation:
4
(05-Sep-2018, 06:58)Pim Wrote: (05-Sep-2018, 06:37)Elztalbiker Wrote: I think the AES are only inputs for digital. Analog outputs only RCA
Gesendet von iPad mit Tapatalk
That's right. I just checked on the configurator.
But it seems there is an option to enable preout?
Kondo Overture PM-2i, Weiss DAC502, LP12 Haben, Aro, Keel, Radikal, Urika, EMT JSD6, Phasemation PP-300/T-300, Linn Krystal, Penaudio Serenade Signature
Kondo Operia SPs 2.7, KSL-VzII, Acz-Avocado, etc.
Posts: 2,441
Threads: 44
Joined: May 2014
Reputation:
84
The "Sub/Preout enabled" option defines whether the sub/pre output is turned on when the amp is playing input from the source you're currently configuring.
Roon (Mac Mini), Wilson Benesch Full Circle, Expert 1000 Pro CI, Kaiser Chiara
Warwickshire, UK
Posts: 243
Threads: 25
Joined: Jun 2014
Reputation:
4
(05-Sep-2018, 14:32)thumb5 Wrote: The "Sub/Preout enabled" option defines whether the sub/pre output is turned on when the amp is playing input from the source you're currently configuring.
Thanks, so i guess the XLR can only be used for digital input.
Kondo Overture PM-2i, Weiss DAC502, LP12 Haben, Aro, Keel, Radikal, Urika, EMT JSD6, Phasemation PP-300/T-300, Linn Krystal, Penaudio Serenade Signature
Kondo Operia SPs 2.7, KSL-VzII, Acz-Avocado, etc.
Posts: 85
Threads: 3
Joined: May 2017
Reputation:
2
Hello,
I have raised a ticket for that question in march 2017 - here the answer from Devialet:
Océane (Devialet)
Mar 6, 17:50 HKT
Dear Thomas,
Thank you for your message.
Only our spdif can be configured for some in pre out.
This is today the only way to connect a headphone to our amplifier.
The AES only receives signal via IN.
Best regards,
Océane | Customer service & support Devialet
I want to connect my headphone-amp via two XLR-monos...
ATB, tom
Devialet 440pro CI - TAD CE-1
Antipodes K50 G4
Bauer Audio DPS3 iT, Colibri XGW Stradivarius
StSt Motus II DQ, Sorane SA-1.2, DRT XV-1s
Germany
Posts: 135
Threads: 15
Joined: Jan 2016
Reputation:
2
Anybody know if this still true today?
Nucklehead AMD Server - Devialet 1000Pro - Magico S3 Speakers
New England
USA
|
