Dialog Plc On Phantom 1

[Shulaf]

Goodevening All,

Can anybody confirm, if the dialog can setup a PLC connection with Phantom 1 I would like to use powerline again as it was the most stable. But I cannot find if it is still present In Phantom 1, or if it is only a digital input. Is it also possible to use plc outlets from different brands?

Thank you for the reply!


Verzonden vanaf mijn iPhone met Tapatalk

[ragwo]

I believe the Dialog only serves as an optical input after DOS2 was released.

[Deezel]

PLC goes over your power line, what brand of outlet you have of that doesn't matter. If you however mean Dialog using PLC, that is a no, you need a Ethernet -> PLC there. If that can be of different brands I don't know (you usually have to pair them, so my guess would be no unless there's an open standard). But if you are running DOS2 you don't need it unless you want it as an extra input.

[Shulaf]

Sorry with outlet I mean powerline adapter, thank you for the explanation


Verzonden vanaf mijn iPhone met Tapatalk