Devialet Chat

Hi all,
I've been lurking for a while on this forum waiting my devialet to arrive. Now that it had, here is my system:
JRiver AIR ETH
Devialet 120 (with firmware 7.1.2)
Nordost SPM
Marten design Miles 3

Welcome to the forum. I'm sure you are enjoying your D120.

It will be great if you can share some photos.

Also I'm surprised that you have firmware 7.1.2!

Current release is 7.1.1 and the beta version is 7.1.3 so it is my first time to see or hear about a Devialet unit with this firmware version.


Sent from my iPhone using Tapatalk

Welcome to the forum. And yes, I'm also wondering about your firmware version. Is it pre-installed in your system?

(09-May-2015, 12:18)hk6230 Wrote: [ -> ]Welcome to the forum. And yes, I'm also wondering about your firmware version. Is it pre-installed in your system?

Yes, preinstalled, it sad FW 7.1.2, 12. jan 2015. Maybe they found something is wrong with 7.1.2 and quickly released 7.1.3 before it made public but some devialets left the fabric already.

Hi,
since there isn't any stand for devialet that I could find I decided to make one.
Here is a few pics of my devialet stand made out of 10mm glass, painted in black. Dim: h:60cm, w:45cm, d:50cm, with holes for cables. Mounted on 3 spikes.

Very nice!

Pecarosh - Very Good Idea. Its been long since i've been thinking how to wall mount Devialet. Either it is getting over budgeted in my idea of what all can be done, or can we find a simpler option for ease of cable replace attach etc. Your Mounts looks great to me.

On the back did you screw Devialet to the Mount ? or there is step-sort of which holds Devialet?

There are 4 holes drilled in glass (288mm x 194mm are center's holes distances). I put screws in holes, with nuts on both side of glass and just hang devialet on these screws. It's hanging on 4 screws and there is a few millimeters distances between devialet rubber feet and glass. Devialet's socket (slot) for wall mounting is 7mm in diameter so It's important that screw's head max diameter is 7mm (or less).

(01-Apr-2016, 12:40)Pecarosh Wrote: [ -> ]There are 4 holes drilled in glass (288mm x 194mm are center's holes distances). I put screws in holes, with nuts on both side of glass and just hang devialet on these screws. It's hanging on 4 screws and there is a few millimeters distances between devialet rubber feet and glass. Devialet's socket (slot) for wall mounting is 7mm in diameter so It's important that screw's head max diameter is 7mm (or less).

+1 Excellent. Thanks for sharing.

love the idea of the stand, very imaginative