27-Jul-2015, 12:14
Pages: 1 2
27-Jul-2015, 12:16
give me the full rundown on how it all connects together
27-Jul-2015, 14:38
(27-Jul-2015, 12:16)completeluxury Wrote: [ -> ]give me the full rundown on how it all connects together
Just for the sake of example, let's say that the source is the AES connection going into the dev. This source is "Pre-Out" enabled per the configurator. The Pre-Out and Analogue Input connections on the Dev are configured as 2 channel. The Pre-Out of the Dev is connected to the Line-In of the Subwoofer Amp/DSP (Signal is full range, no LP/HP Filter). This Amp/DSP has dedicated speaker terminals for the passive Subwoofer with dedicated LP filter settings. The Line-Thru connection of the SW Amp/DSP is then connected to the Line-IN of the Dev. (Signal with independent HP Filter /Latency settings) Source selection while playing music on the Dev is Line-In.
What do you think?
27-Jul-2015, 15:14
Hold the bus, here the official response for the Dev Support Team:
Thank you for your message.
Such external analog loop is not available at the moment. We are aware that this is a limitation of the hardware platform.
But delay adjustment on both preouts and speaker outputs capabilities are going to be released soon on our online configurator, and we will keep you informed.
We stay at your service if you have further questions.
Sounds like I should just keep my feet still for a while ..
Thx
Thank you for your message.
Such external analog loop is not available at the moment. We are aware that this is a limitation of the hardware platform.
But delay adjustment on both preouts and speaker outputs capabilities are going to be released soon on our online configurator, and we will keep you informed.
We stay at your service if you have further questions.
Sounds like I should just keep my feet still for a while ..
Thx
27-Jul-2015, 23:48
or you use something like this to go straight from the xlr to the dsp unit
http://www.seismicaudiospeakers.com/xlr-...es/p/sa-y5
then line in to the devialet without needing to loop around
http://www.seismicaudiospeakers.com/xlr-...es/p/sa-y5
then line in to the devialet without needing to loop around
31-Jul-2015, 14:07
(27-Jul-2015, 15:14)baconbrain Wrote: [ -> ]delay adjustment on both preouts and speaker outputs capabilities are going to be released soon on our online configurator
Now liveĀ
Guillaume
31-Jul-2015, 14:41
guillaume do you have a connection to devialet? you are all over the new releases!
Pages: 1 2