I know that this is possible to go rca to xlr on the Devialet AES input but does anyone know what this might bring over just the regular digital rca input more than the part of the sensitivity on the input?
This text is from Devialets homepage.
Quote:If your player and your Devialet are equipped with an AES/EBU output, we highly recommend using it to interconnect your devices. The RCA inputs are similarly qualitative but can be more sensitive to the output level of the source. Therefore, we advise you, whenever possible, to use an RCA-to-XLR hybrid cable or an RCA/XLR adapter to connect the player's digital out to the AES/EBU input. In both cases, please use a genuine 110Ω or 75Ω digital cable to link both devices.
I am maybe going to connect a mediaplayer with BNC output and was thinking of using a BNC-BNC cable with a Neutrik BNC to XLR adapter in the Devialet, a BNC to BNC cable is easier to get and is easyer to sell again I think than a BNC to xlr cable.
(01-Oct-2015, 15:30)octaviars Wrote: [ -> ]I know that this is possible to go rca to xlr on the Devialet AES input but does anyone know what this might bring over just the regular digital rca input more than the part of the sensitivity on the input?
This text is from Devialets homepage.
Quote:If your player and your Devialet are equipped with an AES/EBU output, we highly recommend using it to interconnect your devices. The RCA inputs are similarly qualitative but can be more sensitive to the output level of the source. Therefore, we advise you, whenever possible, to use an RCA-to-XLR hybrid cable or an RCA/XLR adapter to connect the player's digital out to the AES/EBU input. In both cases, please use a genuine 110Ω or 75Ω digital cable to link both devices.
I am maybe going to connect a mediaplayer with BNC output and was thinking of using a BNC-BNC cable with a Neutrik BNC to XLR adapter in the Devialet, a BNC to BNC cable is easier to get and is easyer to sell again I think than a BNC to xlr cable.
If you're thinking of a Naim streamer they come with a BNC to RCA converter which works just fine
(01-Oct-2015, 21:57)PhilP Wrote: [ -> ] (01-Oct-2015, 15:30)octaviars Wrote: [ -> ]I know that this is possible to go rca to xlr on the Devialet AES input but does anyone know what this might bring over just the regular digital rca input more than the part of the sensitivity on the input?
This text is from Devialets homepage.
Quote:If your player and your Devialet are equipped with an AES/EBU output, we highly recommend using it to interconnect your devices. The RCA inputs are similarly qualitative but can be more sensitive to the output level of the source. Therefore, we advise you, whenever possible, to use an RCA-to-XLR hybrid cable or an RCA/XLR adapter to connect the player's digital out to the AES/EBU input. In both cases, please use a genuine 110Ω or 75Ω digital cable to link both devices.
I am maybe going to connect a mediaplayer with BNC output and was thinking of using a BNC-BNC cable with a Neutrik BNC to XLR adapter in the Devialet, a BNC to BNC cable is easier to get and is easyer to sell again I think than a BNC to xlr cable.
If you're thinking of a Naim streamer they come with a BNC to RCA converter which works just fine
It is a Naim but I am more into going to the xlr input on the Devialet that is what I am wondering about. If a unit has BNC that is the way to go, the only true 75ohm connection so converting it to rca is not as good.
Would appreciate thoughts on which of the following options would be better:
SPDIF output => SPDIF to AES/XLR adaptor => 110 Ohm cable => AES input
OR
SPDIF output => 75 Ohm cable => SPDIF to AES/XLR adaptor => AES input?
Thanks.
(02-Oct-2015, 10:38)nfnc Wrote: [ -> ]Would appreciate thoughts on which of the following options would be better:
SPDIF output => SPDIF to AES/XLR adaptor => 110 Ohm cable => AES input
OR
SPDIF output => 75 Ohm cable => SPDIF to AES/XLR adaptor => AES input?
Thanks.
When I got my link (master->slave) cable from Cabledyne I talked to them about this and they said that if the output is 75ohm it is best to go with that cable and convert it at the input of the Devialet so this must apply to the xlr input from a source aswell.
I have tried both in my set up between my Devialets and I could not hear any differense between 75ohm or 110ohm cable so I went on what Cabledyne told me and ordered a custom rca->75ohm coax->xlr cable and I am very happy with it.
(01-Oct-2015, 15:30)octaviars Wrote: [ -> ]I know that this is possible to go rca to xlr on the Devialet AES input but does anyone know what this might bring over just the regular digital rca input more than the part of the sensitivity on the input?
This text is from Devialets homepage.
Quote:If your player and your Devialet are equipped with an AES/EBU output, we highly recommend using it to interconnect your devices. The RCA inputs are similarly qualitative but can be more sensitive to the output level of the source. Therefore, we advise you, whenever possible, to use an RCA-to-XLR hybrid cable or an RCA/XLR adapter to connect the player's digital out to the AES/EBU input. In both cases, please use a genuine 110Ω or 75Ω digital cable to link both devices.
I am maybe going to connect a mediaplayer with BNC output and was thinking of using a BNC-BNC cable with a Neutrik BNC to XLR adapter in the Devialet, a BNC to BNC cable is easier to get and is easyer to sell again I think than a BNC to xlr cable.
I have for sale a CARDAS CLEAR XLR INPUT ADAPTER (PR)
Female RCA to Male XLR
It is brand new, unused, and is the best Cardas adaptor for RCA female to XLR male.
They come as a pair, and I used the other one for the master-slave link to connect a coaxial cable from the master
to the AES/EBU input of the slave.
The price will be half of what I paid for the pair + shipping.
Let me know if interested.
Miro, so if I understood correctly, you took 75ohm cable with XLR adapter and connect master and slave ?
Not Miro, I bought a cable from DH Labs. The D-110 which is a 110 Ohm AES/EBU cable. And at my request they modified one end with an RCA connector. I use this as the connection between master and slave. Very pleased with the sound quality.
http://www.silversonic.com/docs/products/D110.html
You would need to email them in regards to the modification. I have found they are great to work with. Depending on length cost was south of $100.
(19-Nov-2015, 05:16)baddog Wrote: [ -> ]Not Miro, I bought a cable from DH Labs. The D-110 which is a 110 Ohm AES/EBU cable. And at my request they modified one end with an RCA connector. I use this as the connection between master and slave. Very pleased with the sound quality.
http://www.silversonic.com/docs/products/D110.html
You would need to email them in regards to the modification. I have found they are great to work with. Depending on length cost was south of $100.
I did the same a few weeks ago. DH Labs were great. Cable arrived quickly and sounds great.