Devialet Chat

(12-Jan-2016, 21:26)brit Wrote: [ -> ]

(12-Jan-2016, 16:36)no32 Wrote: [ -> ]Any one know the setup values for shelter 901 & 90x ?

Found this on the 901here: http://www.needledoctor.com/Shelter-901-Phono-Cartridge and there is info on the 901 & 90x here: 
http://www.positive-feedback.com/pfb/axiss.htm. 

Hope this of some use?

David

Thx david

Anyone has experience the linn kandid with the Devialet. Someone told me it match only linn phono stage ...

Just get. Ortofon cadenza Black , and i go too riaa settings  find Black. And  download the settings , put my Sd card i dev , but after i need too turn Up the volume too  0,00  normaly High but NOT With my nye caridge , and idea Why?...

(23-Feb-2016, 18:10)Finn Wrote: [ -> ]Just get. Ortofon cadenza Black , and i go too riaa settings  find Black. And  download the settings , put my Sd card i dev , but after i need too turn Up the volume too  0,00  normaly High but NOT With my nye caridge , and idea Why?...

Double check the voltage setting.  There seems to be a safety mechanism in the Devialet when changing cartridge settings.  You can make any changes you need via the remote.

I think I may have a similar kind of problem. I have configured 450 uVrms as a max level, but in the info menu it is saying that max level actually is 2.50MV. Fortunately it is easy to change these settings via the remote.

I am NOT sure What you mean, Can you explain me like i am 10 years. Please thank you

You can use your remote control to access a RAM information menu when you have selected a phono input. There you can see information about the related phono settings and you can also easily change the settings from there.

For me it was showing different kind of setting in "max level" than what I had configured in the Configurator. I don't know why...

Here is how the RAM menu looks like:

How Can i chance the settings. With my Remote control

(23-Feb-2016, 21:11)Finn Wrote: [ -> ]How Can i chance the settings. With my Remote control

Center button of the 3 on the remote hold it down while looking at the screen on the Devialet.  Once the Balance control comes up, keep hitting the center button to go through all the settings until you arrive at the one you want to change.  Use the volume dial to change the value of a setting.  Once done hold down the center button on the remote to take the Devialet out of settings mode.

[quote='Confused' pid='2741' dateline='1409211807']
Welcome @Wallard!  I'm running my Cadenza Black at 400uv, 100ohms, 0pf.  You can get slightly different results using a higher ohms setting.  I haven't had the Cadenza for long and I'm still experimenting with settings myself.  This should at least offer a reasonable starting point.
[/
Hello. if you use the settings make by dev it is 330 Uv and 30 ohm. Very lov, ( i have cadenza Black) Then i bye ortofon verto SUT .It help but i still must go to Ram settings too get Wolume Up , In just normal Way . Sorry if there Are Wong word ,i come from Denmark .