Devialet Chat

Full Version: Phantom + React?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
(25-Apr-2020, 17:50)Yar36 Wrote: [ -> ]Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
For my home theater system, I use two silvers for the fronts and a 900 as the center.
All three are configured for optical and driven by my Denon receiver via RCA to optical converters.

They are running DOS2 so the minimum latency is 60ms.
If you don't have any regular speakers then you won't notice any latency problems with the video.
I have a regular sub and surrounds, and occasionally the latency do cause an echo effect.
When it happens it's very annoying.
Devialet - if you're listening please bring back optical direct to DOS2.

To balance the volume differences between the silvers and the 900, in my Denon's speaker level settings I set the 900 to be +9.5.
(25-Apr-2020, 18:10)mingfang Wrote: [ -> ]
(25-Apr-2020, 17:50)Yar36 Wrote: [ -> ]Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
For my home theater system, I use two silvers for the fronts and a 900 as the center.
All three are configured for optical and driven by my Denon receiver via RCA to optical converters.

They are running DOS2 so the minimum latency is 60ms.
If you don't have any regular speakers then you won't notice any latency problems with the video.
I have a regular sub and surrounds, and occasionally the latency do cause an echo effect.
When it happens it's very annoying.
Devialet - if you're listening please bring back optical direct to DOS2.
To balance the volume differences between the silvers and the 900, in my Denon's speaker level settings I set the 900 to be +9.5.
Hi. Mr.
I have a question for you. If you are using two silver and one 900 on the front, can you control the volume of two silver and one 900 with the app at the same time?
I set all three speakers' volume to 70 and then use my Denon receiver to control the volume.
The downside is the speakers are always on and at 70; I can hear a hiss at 6" away but not when I'm sitting on my sofa.
(25-Apr-2020, 17:50)Yar36 Wrote: [ -> ]Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
DOS 2.10 now includes multi room (but sorry, do not have Reactors, so can't test).
You can run reactors and classics together in 2.10 update. Didn't hear any sync issues.

Sent from my LM-V450 using Tapatalk
(25-Apr-2020, 17:50)Yar36 Wrote: [ -> ]Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
I have 3 golds and 2 reactor 900s in my HT.  In order for me to get them in sync I had to apply a 120ms delay to the Golds.  I'm running my setup in "Optical Direct/Custom Install mode" and am using Dante adapters to get the signal from my Anthem receiver to the Phantoms.
(29-Apr-2020, 23:54)Snoopy8 Wrote: [ -> ]
(25-Apr-2020, 17:50)Yar36 Wrote: [ -> ]Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
DOS 2.10 now includes multi room (but sorry, do not have Reactors, so can't test).
works perfectly since last update
(01-May-2020, 22:44)njaiswal Wrote: [ -> ]
(25-Apr-2020, 17:50)Yar36 Wrote: [ -> ]Does anyone have a setup leveraging both react 900 and phantoms?
Do they work well together and perfectly in sync?
Any issues or experience anyone could share?
I have 3 golds and 2 reactor 900s in my HT.  In order for me to get them in sync I had to apply a 120ms delay to the Golds.  I'm running my setup in "Optical Direct/Custom Install mode" and am using Dante adapters to get the signal from my Anthem receiver to the Phantoms.
Hi @njaiswal what do you mean by optical direct mode? I can see another post saying that there is no such thing in DOS2.

On my side, 2xGold + 2xReactor 900, no problems in multi-room, but it is a little off topic, because they are actually in different rooms, so not sure I'd hear any 100ms like difference even if there was one.
Pages: 1 2