+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet Expert 400/800, Original d'Atelier, Expert 210/440/1000 Pro (https://devialetchat.com/Forum-Devialet-Expert-400-800-Original-d-Atelier-Expert-210-440-1000-Pro)
+--- Thread: Master/slave link (/Thread-Master-slave-link)
RE: Master/slave link - amabrok - 10-Jan-2015
(10-Jan-2015, 23:46)thumb5 Wrote: I'll try changing both master and slave config, then diff the new master config against the old. Maybe that will shed light on whether it's configuring anything differently to go RCA-XLR rather than RCA-RCA (my bet, for what it's worth, is no).
could be, but be ware that cyclic redundancy check (CRC) might be different
RE: Master/slave link - thumb5 - 10-Jan-2015
Yes, of course - sorry if I was woolly; I meant a proper line-by-line diff, not just a file comparison. Will report the results asap. Cheers!
RE: Master/slave link - thumb5 - 11-Jan-2015
Quick update: apart from the timestamp (and hence CRC), diff showed no changes in the master configuration depending on whether the master/slave link goes to the RCA or AES/EBU input on the slave.
Now for the fun part: listening with the RCA-XLR cable!
Master/slave link - amabrok - 11-Jan-2015
(11-Jan-2015, 10:16)thumb5 Wrote: Quick update: apart from the timestamp (and hence CRC), diff showed no changes in the master configuration depending on whether the master/slave link goes to the RCA or AES/EBU input on the slave.
Now for the fun part: listening with the RCA-XLR cable!
Thanks for the effort invested to check them line by line.
Now tell us if you hear any difference
Sent from my iPhone using Tapatalk
RE: Master/slave link - miro - 11-Jan-2015
(10-Jan-2015, 16:53)thumb5 Wrote:(29-Dec-2014, 13:16)amabrok Wrote: Finally the Neutrik adapter XLR to RCA is here. As planned, will use it with my XLR van den Hul interconnect for my master / slave RCA-XLR link
Will work on a new configuration for my D400 and report back later
Quick question, if you don't mind: did you re-configure the master as well as the slave? (I guess it should only be necessary to change the slave configuration.) I'm hoping to have a play with this over the next few days since I now have an RCA-to-XLR adapter.
Which adapter for RCA to AES/EBU are you using?
RE: Master/slave link - thumb5 - 11-Jan-2015
(11-Jan-2015, 21:12)miro Wrote: Which adapter for RCA to AES/EBU are you using?
I'm using the same Neutrik NA2MPMM adapter as amabrok mentioned earlier (see posts 182 and 186 of this thread).
Unfortunately I haven't had chance to listen to anything today as I'd hoped so can't say anything yet about sound quality changes or otherwise.
RE: Master/slave link - miro - 15-Jan-2015
(11-Jan-2015, 22:06)thumb5 Wrote:(11-Jan-2015, 21:12)miro Wrote: Which adapter for RCA to AES/EBU are you using?
I'm using the same Neutrik NA2MPMM adapter as amabrok mentioned earlier (see posts 182 and 186 of this thread).
Unfortunately I haven't had chance to listen to anything today as I'd hoped so can't say anything yet about sound quality changes or otherwise.
Any updates on this?
RE: Master/slave link - miro - 24-Jan-2015
I used a Stereolab Tombo Tron coaxial for master -> slave, instead of the stock Crystal Cable Standard Diamond digital link cable,
and the performance improved.
Master/slave link - amabrok - 24-Jan-2015
(24-Jan-2015, 04:27)miro Wrote: I used a Stereolab Tombo Tron coaxial for master -> slave, instead of the stock Crystal Cable Standard Diamond digital link cable,
and the performance improved.
I recall other members reporting on the relatively lower quality of the stock Crystal Cable. I guess your observation is consistent with earlier observations.
I'm just curious how would you describe the improvement.
Also keen to know if someone here tested an AES/EBU - RCA link vs a better quality RCA - RCA cable?
Sent from my iPhone using Tapatalk
RE: Master/slave link - miro - 24-Jan-2015
(24-Jan-2015, 06:37)amabrok Wrote:(24-Jan-2015, 04:27)miro Wrote: I used a Stereolab Tombo Tron coaxial for master -> slave, instead of the stock Crystal Cable Standard Diamond digital link cable,
and the performance improved.
I recall other members reporting on the relatively lower quality of the stock Crystal Cable. I guess your observation is consistent with earlier observations.
I'm just curious how would you describe the improvement.
Sent from my iPhone using Tapatalk
The improvement was as though the entire system disappeared, and I was at a live performance.