2.12.5 and the problem returns - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: 2.12.5 and the problem returns (/Thread-2-12-5-and-the-problem-returns) |
RE: 2.12.5 and the problem returns - Eggman - 14-Mar-2021 (13-Mar-2021, 17:37)vaguedetails Wrote:(13-Mar-2021, 02:05)Eggman Wrote: I confess I don't quite understand Roon, but wouldn't it be simpler to play music through the Tidal app and Airplay, considering MQA is off the table with Devialet anyway? UPDATE: As per Devialet support, I connected both Phantoms via Ethernet to the router. They work! But now I'm moving to a house where the modem/router are nowhere near where I'm going to place the Phantoms. Any suggestions on a good router for the Phantoms? Devialet essentially said mesh routers won't work. 2.12.5 and the problem returns - Flaeske - 20-Mar-2021 I used DIALOG optical for my turntable and midi mixer since my phantoms hanging on gecko and I don’t want to have cables hanging around. I spend time to set up all with analog to digital converter to send signal to DIALOG. It all worked pretty great with every update with knowledge that DIALOG its discontinued device but supported for those who still use it. But after 2.12.15 update it stop working. I spend 60 minutes on phone with Devialet support and since we didn’t manage to work it out I get some options by the one I spoke with: -I should find and buy myself dialog on after market eBay etc. or get new device arch with discount 50€. I’m super unhappy because it’s seams like it’s my problem not Devialet that DIALOG after update stoped working... Sent from my iPhone using Tapatalk Pro RE: 2.12.5 and the problem returns - Lee inseok - 21-Mar-2021 (24-Feb-2021, 09:54)tsmithpam Wrote: Coming back to the thread topic.My speakers are experiencing this phenomenon repeatedly occurring irregularly after the 2.12.3~5 firmware, currently it only occurs in gold speakers. Before past, it returned to normal after rebooting, but now the same phenomenon occurred once more after rebooting. 2.12.5 and the problem returns - tsmithpam - 21-Mar-2021 Sorry to hear you also have this. Sorry also to say there is no resolution for the issue that I know of. Been through the loops with Devialet and settled for now on ‘learning to live it’. Hasn’t come back for a while for me, but expect it too. I think that it’s the start of the older phantoms struggling to cope with updates going forward. The next step from Devialet is the offer of discounts to replace with newer versions. We will soon be the owners of an equivalent iPhone 5! Sent from my iPhone using Tapatalk 2.12.5 and the problem returns - Flaeske - 23-Mar-2021 (20-Mar-2021, 13:39)Flaeske Wrote: I used DIALOG optical for my turntable and midi mixer since my phantoms hanging on gecko and I don’t want to have cables hanging around. I spend time to set up all with analog to digital converter to send signal to DIALOG. It all worked pretty great with every update with knowledge that DIALOG its discontinued device but supported for those who still use it. But after 2.12.15 update it stop working. I spend 60 minutes on phone with Devialet support and since we didn’t manage to work it out I get some options by the one I spoke with: I just made some test and connect both phantoms to Ethernet and by that dialog start to send signal to phantoms but once I disconnected each phantom from Ethernet they not receiving signal from Dialog. Would you call it software issue or something else? Does any one have an idea? Sent from my iPhone using Tapatalk Pro RE: 2.12.5 and the problem returns - echooo23 - 25-Mar-2021 Same issues with the jitter here. Two golds, happens more often on the left but occasionally on the right too. I find it happens more often when I’m on Apple TV and pausing often. Less so with Spotify and pausing less. Instead of unplugging to reset, I open the Devialet app and tap the speaker so that it makes that timpani-type sound. It then comes back fully without jitter (until the next time). Takes a couple seconds. Still annoying though. RE: 2.12.5 and the problem returns - Lee inseok - 25-Mar-2021 (25-Mar-2021, 00:51)echooo23 Wrote: Same issues with the jitter here. Two golds, happens more often on the left but occasionally on the right too. I find it happens more often when I’m on Apple TV and pausing often. Less so with Spotify and pausing less. Instead of unplugging to reset, I open the Devialet app and tap the speaker so that it makes that timpani-type sound. It then comes back fully without jitter (until the next time). Takes a couple seconds. Still annoying though. Unfortunately for me too, recently, the same phenomenon occurs repeatedly several times a day. And the cycle of occurrence is getting shorter and shorter. Even yesterday, the same phenomenon occurred once while listening upnp play. Looking at the three gold speakers is frustrating. 2.12.5 and the problem returns - Flaeske - 27-Mar-2021 (25-Mar-2021, 02:13)Lee inseok Wrote:(25-Mar-2021, 00:51)echooo23 Wrote: Same issues with the jitter here. Two golds, happens more often on the left but occasionally on the right too. I find it happens more often when I’m on Apple TV and pausing often. Less so with Spotify and pausing less. Instead of unplugging to reset, I open the Devialet app and tap the speaker so that it makes that timpani-type sound. It then comes back fully without jitter (until the next time). Takes a couple seconds. Still annoying though. Got same think on airplay today but only on R speaker(PLC) L speaker is connected with Ethernet because it’s close to modem but my dialog don’t work after this update Sent from my iPhone using Tapatalk Pro RE: 2.12.5 and the problem returns - markush - 28-Mar-2021 So is the best workaround to try connecting one Phantom via Ethernet (of the other cannot because of position) and for the other phantom selecting Auto or PLC. In addition trying that the WiFi router just sends either 5ghz or 2,4ghz and not both at the same time? RE: 2.12.5 and the problem returns - scotthar - 28-Mar-2021 Eggman RE: As per Devialet support, I connected both Phantoms via Ethernet to the router. They work! But now I'm moving to a house where the modem/router are nowhere near where I'm going to place the Phantoms. Any suggestions on a good router for the Phantoms? Devialet essentially said mesh routers won't work. Hi, Maybe you could create your own private Ethernet network and bridge that to your internet gateway. I create an Ethernet network for the speakers using an extra router with built in WIFI AP. and connect to this AP when using the Devialet app. The "2nd" "phantom network" router/ap also has two switches connected via Ethernet. each Ethernet switch in a "room" has a phantom pair, the dialog and/or other related devices. The phantom network router is using a MOCA "coax to Ethernet" adapter "on the internet port to connect to the (xfinity) 'Internet Gateway' Premise router. Alternatively you could connect the 2nd router to your internet gateway over wifi, if the 2nd router supports such bridging over wifi This may or may not be an option depending on how you are getting your internet but there are many ways this could work. regards scott- |