Branch stand. - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: Branch stand. (/Thread-Branch-stand) |
Branch stand. - Rodrat2 - 08-May-2015 Based on the picture and dimensions of the Phantom, they seem to be about 600mm high. Putting aside the looks, they seem to be a bit low. I am currently using 100mm stands which are perhaps slightly to high. I Would have thought 800 mm to be the ideal height putting the tweeter at ear level when seated. Has anyone seen the specs on the remote? Is it simply a volume control or does it display the playlist or the travh? RE: Branch stand. - EvPa - 09-May-2015 My custom made ones are 800mm high (solid teak): (the ADAM Audio ARTist 6 next to it is 850mm high and was used as a temporary stand) These are the "handmade" anchor points securing the Phantom's chassis to the column: (mainly here due to quite a few cats roaming around) The end result: Regarding the remote, only play/pause, previous/next and volume have been show up to now (as far as I know); the screen is some sort of e-paper: It also looks quite tall, going by the one shown at the Phantom's launch event: Branch stand. - amabrok - 09-May-2015 (09-May-2015, 02:00)EvPa Wrote: My custom made ones are 800mm high (solid teak): Good work with the custom made Phantom stand. For the remote, I'm not sure that this is the final specs. I believe it is not final as yet so may be the e-ink display will have additional screens (probably by swiping left or right) which will add more functionality to the remote. I stand to be corrected, though. As with Devialet custom, they leave us out in the dark and prone for more speculations Sent from my iPhone using Tapatalk RE: Branch stand. - hk6230 - 09-May-2015 (09-May-2015, 09:39)clive.grace Wrote: I find the branch stands a bit ornate and want something minimal and yet at odds with the spherical nature of the speaker so I designed Z stands from 65mm Iroko worktops that used to form my Mixing desk table... I would love to hear your feedback on Phantom performance vs D200 + B&W800s. I'm thinking to switch my D200 to two Silvers, too. Here in China, Phantom is scheduled to be launched in June/July period. RE: Branch stand. - davidadamson - 10-May-2015 Had you considered the angle of the phantoms? They tilt upwards and it seems an ideal height would be 24 inches (sorry not metric here ). This from a 2 to 3 meter listening distance directs the tweeter at my ear level, higher than that would be over my head. Branch stand. - mirekti - 11-May-2015 Any respond from Devialet about the availability? RE: Branch stand. - Rodrat2 - 15-May-2015 My Phantoms had been on a pair of one metre tall stands where the tweeter passed way over my head. They were perhaps to close together but sounded fine. I have now put them on a pair of 650 mm stands which on a rough estimate are the same height as the Branch stands. They seem a bit duller and slightly shut in. I heard Franks pair on tall stands which also sounded fine. I was going to push the buy button when the Branch stands were available, I am not so sure now especially at £250 a pop. Branch stand. - davidadamson - 16-May-2015 VPI stands, nice fit until Branch comes along Sent from my iPhone using Tapatalk RE: Branch stand. - mirekti - 17-May-2015 I am interested in Branch as I would be able to hide the cable. At least a part of it, still not sure what to do between the stand and the wall. |