+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: The Vinyl Thread (https://devialetchat.com/Forum-The-Vinyl-Thread)
+--- Thread: 96 or 192 kHz (/Thread-96-or-192-kHz)
Pages:
1
2
96 or 192 kHz - jfp - 20-Jun-2015
When Devialet set up my 400 at home they choose the 192 kHz frequency. But I have read it was recommended to choose 96 on Devialet web site.
What did you do ?
I just updated my linn lp12 today with new tone arm Akito and Lyra Delos cartridge.
RE: 96 or 192 kHz - Rufus McDufus - 20-Jun-2015
You mean the sample rate on the analogue inputs? When I got my Devialet I had a Linn Klimax DS connected via an analogue input on the Devialet and initially set it to 192kHz because it's obviously got to be better, right? (!) I subsequently found it sounded better at the default 96kHz.
RE: 96 or 192 kHz - Dr Tone - 20-Jun-2015
96kHz for me. Didn't try 192 as 96 is the recommended setting. I've always needle dropped at 96kHz even before I got the 200.
RE: 96 or 192 kHz - Axel - 21-Jun-2015
I have always had mine set at 96 kHz as it sounds better to my ears, but set it at what sounds best to you.
RE: 96 or 192 kHz - f1eng - 21-Jun-2015
When the configurator first came on line I set my D-Premier at 192, bigger is better right? But there are good reasons why it is unnecessary or even potentially worse, so I went back to 96kHz. I didn't do a listening test though. I have left it at the default ever since.
See if you hear a difference.
I would not expect to hear one myself.
RE: 96 or 192 kHz - Confused - 21-Jun-2015
With respect to the phono input, the advice I received, both from my dealer and one time from a Devialet rep direct, is that 96 kHz slightly quieter and that 192 kHz provides no audible improvement in itself.
96 or 192 kHz - amabrok - 21-Jun-2015
Same here. I'm staying with 96KHz
Sent from my iPhone using Tapatalk
96 or 192 kHz - Elztalbiker - 21-Jun-2015
96 kHz sounds better cause 192 kHz produce to much signal-to-noise ratio
Sent by iPad
RE: 96 or 192 kHz - thumb5 - 21-Jun-2015
(21-Jun-2015, 14:41)Elztalbiker Wrote: 96 kHz sounds better cause 192 kHz produce to much signal-to-noise ratio
Sorry to be pedantic, but I guess you mean "too much noise"...
96 or 192 kHz - Elztalbiker - 21-Jun-2015
thumb5 jepp your are right
Sent by iPad