200 is at the anodizer... - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Tweaker's Corner (https://devialetchat.com/Forum-Tweaker-s-Corner) +--- Thread: 200 is at the anodizer... (/Thread-200-is-at-the-anodizer) |
200 is at the anodizer... - Manoet - 02-Sep-2015 Should be done by next Wednesday/Thursday and we'll all be able to see the 1st black anodized Expert. I'm letting the anodizer do all the internal prep work that will mask & retain the many chassis grounds at all the PCB mounting locations as once anodized the case will no longer be conductive on any of its internal/external exposed surfaces. Fingers crossed I get lucky on this phase as its the last step before reassembly. RE: 200 is at the anodizer... - krass - 02-Sep-2015 Manoel, why is the anodized surface not conductive ? I always thought it was a type of metallisation process that changed the outer surface but left it as a metal. I should probably google it but I'm sure you'll give a better answer ! RE: 200 is at the anodizer... - Manoet - 02-Sep-2015 Anodizing via acid electroplating self-etches a crystalline layer of aluminum oxide into the aluminum surface... a compound of crystallized aluminum & oxygen forms the mineral Corundum which can also, with other trace metal elements added form rubies and/or sapphires. Aluminum oxide is best known for its use as an abrasive as it outlives and outperforms silica (sand) due to inherent hardness and doesn't like to 'load-up' or wear out as easily as regular sandpaper does. Basically it envelopes and etches itself into the aluminum then hardens, rendering its surface layer crystalline, although not necessarily shiny, non-conductive and "harder than Chinese arithmetic to an English teacher." |