Cartridges and phono settings - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: The Vinyl Thread (https://devialetchat.com/Forum-The-Vinyl-Thread) +--- Thread: Cartridges and phono settings (/Thread-Cartridges-and-phono-settings) |
RE: Cartridges and phono settings - Confused - 28-Aug-2014 @theaudioguru - I've never even considered running my Cadenza on high ohms. So an interesting post from yourself, I'll certainly give this a try when I get some time! RE: Cartridges and phono settings - theaudioguru - 30-Aug-2014 (28-Aug-2014, 20:47)Confused Wrote: @theaudioguru - I've never even considered running my Cadenza on high ohms. So an interesting post from yourself, I'll certainly give this a try when I get some time! @Confused Yeah my dealer recommended trying it and it worked really well for me. I did play with the power uvms settings , going lower than 400 gave me more volume and body but i wasn't too sure if it was wise to mess with? All tips welcome! Audioguru RE: Cartridges and phono settings - GTX - 19-Sep-2014 Hi, can someone share their settings for denon DL103 (I have pan upgraded one by Midas)? Currently using MC, 300μV rms, 100ohm, 100pf, 1976 RIAA, 96khz. Thanks! RE: Cartridges and phono settings - Ducatiman - 06-Dec-2014 Anybody using an Audionote Io cartridge ? RE: Cartridges and phono settings - rbsound - 16-Dec-2014 Anyone have their recommended settings for the Ortofon 2M Black cartridge? Thanks. RE: Cartridges and phono settings - Dr Tone - 27-Dec-2014 Sumiko Bluepoint Special EVO III MC, 2500μV rms, High, 0pf, 1976 RIAA, 96kHz RE: Cartridges and phono settings - Dr Tone - 28-Dec-2014 (27-Dec-2014, 16:34)Dr Tone Wrote: Sumiko Bluepoint Special EVO III After watching the digital input on Presonus Studio One I had to adjust the the voltage from 2500μV to 3000μV to get the digital clipping in control on my loudest EP. Of course that made a major sound improvement as well. My cartridge could just be hotter then spec, or 20% over cartridge value might be a safe margin for everyone to use. We should collect some more data if users have DAWs. RE: Cartridges and phono settings - f1eng - 29-Dec-2014 Cartridge outputs are normally specified for 0dB=5cm/sec (at 1kHz iirc) but plenty of records have a higher level than this recorded on them, so one needs to check whilst playing one's most heavily modulated record. I have heard +8dB to be a common max modulation level. One doesn't strictly need a DAW, the input flashes red on the display if digital clipping of the ADC is approached. I have used this feature to set gain of all my analogue inputs. RE: Cartridges and phono settings - photon - 29-Dec-2014 (19-Sep-2014, 00:18)GTX Wrote: Hi, can someone share their settings for denon DL103 (I have pan upgraded one by Midas)? I've got the Zu version of the Denon DL-103 and I'm using the settings: MC, 400μV rms, High ohm, 100pf, 1976 RIAA, 96khz. However, I really have no idea what the pF should be. All I have is the data that came with the cartridge. see attached image. RE: Cartridges and phono settings - Finn - 23-Jan-2015 Looking for new cartridge i have those 2 in my mind // Audio note iQ1 or kiseki purpleheart . Can anybody tell me the settings about those cartridge ,then i Will be wery glad and i say hello from Denmark |