Ongoing: Phantom/Dialog/Spark protocol deciphering and development - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: Ongoing: Phantom/Dialog/Spark protocol deciphering and development (/Thread-Ongoing-Phantom-Dialog-Spark-protocol-deciphering-and-development) |
RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - iliapas - 08-Jan-2016 Protocol between phantom and spark is not deciphered yet. If you have spare time and want to help, would appreciate a wireshark dump of traffic, especially with 2 phantoms and a dialog, using each of the optical inputs one after another and streaming network audio (tidal etc). RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - bearcatsandor - 08-Jan-2016 I have the time and knowledge but not the equipment. I'm a prospective buyer not an owner yet. RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - dguillet - 18-Jan-2016 (08-Jan-2016, 20:13)iliapas Wrote: Protocol between phantom and spark is not deciphered yet. If you have spare time and want to help, would appreciate a wireshark dump of traffic, especially with 2 phantoms and a dialog, using each of the optical inputs one after another and streaming network audio (tidal etc). Hi, I only have 1 Silver Phantom. What I've done so far is tweeted devialet to get API for the Phantom. I've run nmap on the phantom and check for TCP port being opened. I've tried to ssh on all the port without success. It runs a linux distribution but can connect to it. I have a done a tcpudump as well but its quite blur to me yet even some http commands can be found in some packets. Actually all TCP connection are initiated from the Spark app. So far I'm pretty stuck to be honest RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - ogs - 18-Sep-2016 I was not aware of this thread and initiative! Very exiting even if nothing new seems to have happened since early -16. If I had known I would have tried to get a Wireshark log of the communication between Dialog and Phantoms which I had at home a couple of weeks ago. I will make sure I do this next time I have Phantoms home for audition. Hopefully Golds this time! RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - daibaron - 18-Sep-2016 How are you so sure it runs a Linux distro ? ^^ have you opened the Dialog and see on which hardware the system is running ? Port scanning over TCP/IP is showing most of the time unrrelevant information that can't be used for further investigations. To me the Dialog act as a router/webserver... in fact i really don't know RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - jcd1877 - 19-Sep-2016 (03-Jan-2016, 17:57)Gaustabl Wrote:I too have been trying to get a third party remote for volume only as a minimum to work. I'm no programming wizard, but I assume the Dialog must allow some standard http protocol for volume control as you can control volume via Spotify???(03-Jan-2016, 14:40)iliapas Wrote: Sadly, no. The protocol (as it seems right now at least) is to let Phantom know you're there, then get a list of ports from it, then connect to appropriate control port, and then send a packet to that port, with appropriate command message using some non-http protocol. RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - Johnnydev - 19-Sep-2016 (19-Sep-2016, 00:41)jcd1877 Wrote:(03-Jan-2016, 17:57)Gaustabl Wrote:I too have been trying to get a third party remote for volume only as a minimum to work. I'm no programming wizard, but I assume the Dialog must allow some standard http protocol for volume control as you can control volume via Spotify???(03-Jan-2016, 14:40)iliapas Wrote: Sadly, no. The protocol (as it seems right now at least) is to let Phantom know you're there, then get a list of ports from it, then connect to appropriate control port, and then send a packet to that port, with appropriate command message using some non-http protocol. If you open spark, you can chance the volume with your iPhone with the volume buttons on the left site from your phone RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - cyrus.b - 04-Nov-2016 any updates on efforts here? RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - sekriT - 07-Nov-2016 I am anxiously waiting too. It's not gonna happen if only one guy works on this. I wish I was a linux guru. RE: Ongoing: Phantom/Dialog/Spark protocol deciphering and development - alexis0587 - 16-Dec-2016 (30-Dec-2015, 11:44)iliapas Wrote: If anybody is interested in Mac OS version, let know, it's even simpler on Mac Interested to have a tuto for your mac version ! Can send you a wireshark with 2 Phantom + Dialog if still needed |