Devialet on the wall - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Support Desk (https://devialetchat.com/Forum-Support-Desk) +--- Thread: Devialet on the wall (/Thread-Devialet-on-the-wall) |
Devialet on the wall - adro - 11-Sep-2014 Hi. Anyone mounted their Devialet on the wall?. Devialet mounting frame or self made? How is the Devialet fastened to the mount? Regards Atle RE: Devialet on the wall - ogs - 11-Sep-2014 (11-Sep-2014, 15:25)adro Wrote: Hi. I have my 250 mounted on a hinged door on a book shelf. The 250 has slots for screw heads on it's feet so it was easy to mount. Looks very nice and tidy. I think 120/200 has similar screw head slots on it's bottom cover RE: Devialet on the wall - Martyn - 11-Sep-2014 We've done this and it looks beautiful! The official devialet mounts are very expensive though. RE: Devialet on the wall - rik - 11-Sep-2014 (11-Sep-2014, 15:53)ogs Wrote:(11-Sep-2014, 15:25)adro Wrote: Hi. Photo's please. Tnx, Rik RE: Devialet on the wall - IanG-UK - 11-Sep-2014 I have both my Devialet 250s wall mounted. Here in the UK each mount is £385 which, as Martyn says, is a crazy price - which must therefore carry a huge amount of profit. So I am sure with a bit of cheek you can get them for a whole lot less than retail (which is what I did). RE: Devialet on the wall - adro - 11-Sep-2014 Thanks. I sure will like to put it on the wall, but as mentioned the mount is very expensive. I have just lifted it up and looked under. Could not see any slots for screws. Will remove the cables tomorrow so I can and turn it around and see closer. Thinking of making a mount of plexi/plastic glass. Rgds Atle RE: Devialet on the wall - ogs - 11-Sep-2014 (11-Sep-2014, 20:37)rik Wrote: Photo's please. Photo is not very good, sorry about that. There is plenty of room behind the amp for cables and such. RE: Devialet on the wall - Confused - 11-Sep-2014 Photo is excellent! Nice chair! RE: Devialet on the wall - Tony - 12-Sep-2014 Have mounted my D200 on the wall... home made. I was lucky enough to have the Devialet wall mounting kit to examine and take measurements from but the price was just too much for what it was doing so a trip to B&Q yielded a bit of shelving that was fastened to the wall via 4 rubber gromits to provide a bit of isolation between the wood and the (not too flat) wall and 4 brass flat headed screws that fit into the grooves on the D200 feet. Only problem subsequently is that the Remote is now incredibly directional. I logged this with Devialet and their theory was that the fact that it was in an alcove was impacting on the RF. Not 100% convinced as two of the four 'sides' are wood and I would have thought RF would go through that unimpaired. In effect I have to make sure the remote is above the level of the D200 to ensure it works, Interested to know if anybody else has similar problem / theory? Photo attached... RE: Devialet on the wall - adro - 12-Sep-2014 From the pictures it loooks very nice on the wall. But the original wall mount is a bit to expensive so I will try to find another solution. Atle |