+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet News (https://devialetchat.com/Forum-Devialet-News)
+--- Thread: New Firmware 10.1.0 (/Thread-New-Firmware-10-1-0)
RE: New Firmware 10.1.0 - ogs - 04-May-2017
(04-May-2017, 08:03)NickB Wrote: Has anyone noticed a change to the USB? When I switched my Devialet off or changed to a different input my uRendu stopped playing, now it doesn't, in fact my Devialet is switched off and I can still play music to my uRendu.
Or was this a change when the PRO upgrades were done?
Is this on your 1000? Did you bypass the Mutec and go microRendu->Devialet USB? If it is microRendu->Mutec it does not matter which state the Devialet is in.
RE: New Firmware 10.1.0 - Hifi_swlon - 04-May-2017
(04-May-2017, 05:57)ogs Wrote: I am getting the same behaviour on my 250 Pro. It simply ignores the SD card with 10.0.5 and boots into 'Factory default' config. This needs to be checked by more owners. A question to Devialet support about this is in place too I think.
@Vivialet do you (or anyone) have 10.0.7 as a zip?
EDIT: I've sent a question to Devialet support about this. This is probably OK with upgraded units as 10.1.0 sounds good, but if it turns out that non-upgraded Experts can no longer be loaded with for example 7.1.3 after 10.1.0 this may become a major issue!
I'll try and give a downgrade ago later. Hopefully it's just a mistake if for some reason firmware can't be rolled back from 10.1.0. If it's a policy change to not allow downgrades, that would be upsetting. I mean, would it kill them to ever list what the firmware versions actually do.
RE: New Firmware 10.1.0 - Cylob - 04-May-2017
(04-May-2017, 08:11)ogs Wrote: In post 57 of this thread Cylob says he tried 10.1.0 and went back to 7.1.3 shortly after as he did not enjoy the new version. @Cylob, can you confirm that the downgrade from 10.1.0 to 7.1.3 on your 200 worked?
Yes! I went back to 7.1.3 without any problems.
Did a fresh extract of the zip-file and added my latest config file [created about 6 months ago].
After the firmware downgrade I removed all the firmware files from the sd-card and only kept the config file on the card.
RE: New Firmware 10.1.0 - ogs - 04-May-2017
(04-May-2017, 11:04)Cylob Wrote:(04-May-2017, 08:11)ogs Wrote: In post 57 of this thread Cylob says he tried 10.1.0 and went back to 7.1.3 shortly after as he did not enjoy the new version. @Cylob, can you confirm that the downgrade from 10.1.0 to 7.1.3 on your 200 worked?
Yes! I went back to 7.1.3 without any problems.
Did a fresh extract of the zip-file and added my latest config file [created about 6 months ago].
After the firmware downgrade I removed all the firmware files from the sd-card and only kept the config file on the card.
Thanks! Good to get this confirmed!
Then I guess the downgrade behaviour is limited to 10.0.5 (and maybe .6 and .7. Is there a 10.0.2 too?) The always helpful Océane has promised to get back to me with explanations later.
RE: New Firmware 10.1.0 - Cylob - 04-May-2017
(04-May-2017, 11:21)ogs Wrote:(04-May-2017, 11:04)Cylob Wrote:(04-May-2017, 08:11)ogs Wrote: In post 57 of this thread Cylob says he tried 10.1.0 and went back to 7.1.3 shortly after as he did not enjoy the new version. @Cylob, can you confirm that the downgrade from 10.1.0 to 7.1.3 on your 200 worked?
Yes! I went back to 7.1.3 without any problems.
Did a fresh extract of the zip-file and added my latest config file [created about 6 months ago].
After the firmware downgrade I removed all the firmware files from the sd-card and only kept the config file on the card.
Thanks! Good to get this confirmed!
Then I guess the downgrade behaviour is limited to 10.0.5 (and maybe .6 and .7. Is there a 10.0.2 too?) The always helpful Océane has promised to get back to me with explanations later.
There is a 10.0.2 version as well. I've tried / downgraded that version too.
There are even some other versions, but these were never released as downloads, only installed on new OdA's / Pro's, so haven't tested these.
RE: New Firmware 10.1.0 - ogs - 04-May-2017
Update from Océane at Devialet:
"Actually I found the answer !
In firmware .5 file there lack the file clr_hwfw.txt
If you copy it from the .10 file and paste it into the .5, the 10.1.5 will load.
I hope it helps your testings."
So it seems someone at Devialet made an error when 10.0.5 was released for download, or there is a difference before/after 10.1.0. I've just downgraded to 10.0.5, the fix from Océane works!
RE: New Firmware 10.1.0 - thumb5 - 06-May-2017
(26-Apr-2017, 20:02)yabaVR Wrote: ...
If I sum up your comments is it right that you say there is no such thing as jitter in the audio chain from a computer to a Devialet or DAC espacially if we use AIR (over ETH)? Right?
...
Sorry for taking a while to reply; I've been away and didn't have time to write a post doing justice to this topic.
Anyway, to avoid hi-jacking the original topic any further I've started a new thread here to continue the discussion (if anyone's still interested...).
RE: New Firmware 10.1.0 - Flashman - 09-May-2017
When you upgrade the firmware, Devialet tells you to wipe everything off the SD card before you install the new firmware. Does that include the config file? I had to reinstall my configuration after upgrading to 10.1.0 but I wonder whether I would have needed to do this had I kept the configuration file on the SD card during the firmware upgrade. Anyone know?
RE: New Firmware 10.1.0 - Hifi_swlon - 09-May-2017
I always leave mine on there. Never had an issue so far.
RE: New Firmware 10.1.0 - Flashman - 09-May-2017
(09-May-2017, 18:46)Hifi_swlon Wrote: I always leave mine on there. Never had an issue so far.Good to know! Thanks!