ROON/AIR and Last Fault - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Streaming (https://devialetchat.com/Forum-Streaming) +--- Thread: ROON/AIR and Last Fault (/Thread-ROON-AIR-and-Last-Fault) |
ROON/AIR and Last Fault - Dan - 29-Aug-2017 I have been listening to ROON/AIR with hardly an issue up to a couple of days ago at which point I got no sound out of the left speaker and only garbled sound out of the right speaker. I also sometimes listen to HQP thru ROON and a mRendu - that continues to work fine so I assumed the problem was with the ethernet. I have an Aqvox switch and a few media fiber conditioners - checked all connections - they were all fine - and still got garbled sound. I eliminated the conditioners one by one and eventually the switch. Still garbled sound. I have two 250 Pros that I run as a 1000 so I swapped which was the master and which was the companion. Problem solved. I figured it must be a bad Ethernet input on the 250 that I like to use as the master. I then thought to check the Last Fault screen and on the 250 that was the original companion it listed: LAST FAULT A-10004 Class A+ 2 left Over Current So I have no idea what the issue is. Has anyone ever gotten this message? (I passed it on to EVA from Devialet who has assisted me in the past) I am starting to get nervous thinking of the long run. I've had the Over Temp, Over Voltage, Magic Wire Calibration, and other faults. The units went back to France a couple months ago for the Magic Wire issue. What happens when the warranty is up? Has anyone had this problem/fault? |