How to configure Devialet for connecting active speakers? - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Support Desk (https://devialetchat.com/Forum-Support-Desk) +--- Thread: How to configure Devialet for connecting active speakers? (/Thread-How-to-configure-Devialet-for-connecting-active-speakers) |
How to configure Devialet for connecting active speakers? - Bartype - 13-Oct-2017 A friend of mine wants to test some active speakers if they are ok. I told him he could use the Devialet for this, but up until now it seems i can't find how to configure the Devialet as pre-amp, which is propably needed to make this work... Is there someone who can point me in the right direction? Much thank yous in advance! RE: How to configure Devialet for connecting active speakers? - thumb5 - 13-Oct-2017 In the configurator, click on the drop-down menu for one of the RCA Digital inputs (next to the AES/EBU) and select "Pre-amplified Output (Stereo)". That's assuming you want analog; otherwise you can select "Digital Output (SPDIF)" for a digital output. Hope that helps... RE: How to configure Devialet for connecting active speakers? - Bartype - 14-Oct-2017 (13-Oct-2017, 19:50)thumb5 Wrote: In the configurator, click on the drop-down menu for one of the RCA Digital inputs (next to the AES/EBU) and select "Pre-amplified Output (Stereo)". That's assuming you want analog; otherwise you can select "Digital Output (SPDIF)" for a digital output. Thank you for the reply, but those speakers do have actual speaker cable connectors and no RCA... These are the Infinity Overture 1... RE: How to configure Devialet for connecting active speakers? - Confused - 14-Oct-2017 (14-Oct-2017, 08:34)Bartype Wrote:(13-Oct-2017, 19:50)thumb5 Wrote: In the configurator, click on the drop-down menu for one of the RCA Digital inputs (next to the AES/EBU) and select "Pre-amplified Output (Stereo)". That's assuming you want analog; otherwise you can select "Digital Output (SPDIF)" for a digital output. https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwigstquz-_WAhVLOxoKHfwWDI8QFgguMAE&url=http%3A%2F%2Fpdfstream.manualsonline.com%2F6%2F6adce4e0-3bff-5f34-89ed-bbfcc868b789.pdf&usg=AOvVaw2lpIiI6XiBmLs4XSJo6NBg It looks like you simply connect them to the amplifier in the same way that you would with a passive speaker. The manual indicates a recommended maximum amplifier power of 100w, so it might be worth restricting the Devialet's output in the configurator, or at least you should be careful with the volume control! RE: How to configure Devialet for connecting active speakers? - ogs - 14-Oct-2017 Are these passive mid/treble and a powered sub built in? Then ordinary speaker cables should do the job. Your friend gets the advantage of ADH for mid/treble RE: How to configure Devialet for connecting active speakers? - Bartype - 14-Oct-2017 (14-Oct-2017, 09:00)Confused Wrote:(14-Oct-2017, 08:34)Bartype Wrote:(13-Oct-2017, 19:50)thumb5 Wrote: In the configurator, click on the drop-down menu for one of the RCA Digital inputs (next to the AES/EBU) and select "Pre-amplified Output (Stereo)". That's assuming you want analog; otherwise you can select "Digital Output (SPDIF)" for a digital output. Thank you guys, this is all very helpful! |