Firmware 12.3.0 + DOS 2.2.2 - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet News (https://devialetchat.com/Forum-Devialet-News) +--- Thread: Firmware 12.3.0 + DOS 2.2.2 (/Thread-Firmware-12-3-0-DOS-2-2-2) |
RE: Firmware 12.3.0 + DOS 2.2.2 - Will - 14-Jun-2018 (14-Jun-2018, 10:26)K4680 Wrote:I am no technician - so cannot explain how the new router differs from the old one - except being a bit more expensive! I expect that the newer routers are designed for multiple media streaming, which was not a major issue a few years ago. However, up until I replaced the router, I had assumed that the occasional dropouts etc were largely due to the Bluesound or Devialet systems rather than my own network setup. Of course, in that time, both Bluesound and Devialet have also upgraded, which complicates the matter in trying to work out where the problem might have been. However, hopefully, all this is in the past - the net effect is that I will be spending time listening to the music rather than consulting Devialet Chat!(14-Jun-2018, 08:07)Will Wrote:(13-Jun-2018, 15:45)Gerronwithit Wrote: ...This B.B. has been relatively quiet of late, is that good news for Devialet or not?Finally after 3 years I appear to have a stable set up that consistently delivers superb sound quality that Devialet always promised - so there is much less need for me to consult Devialet Chat to find the way out of the latest glitch. RE: Firmware 12.3.0 + DOS 2.2.2 - tategoi - 15-Jun-2018 I had Asus AC-88 and run a 23m cat 6 straight to a switch in my music room. Only the Od’A and Nucleus+ connected to this switch. I don’t remember having any dropout. RE: Firmware 12.3.0 + DOS 2.2.2 - marcor - 16-Jun-2018 Installed the new version without issues. All seems to work fine. I tried to use AirPlay and the Devialet automatically switched from the usb input that was not playing to the AirPlay one. When I stopped to play and I started Roon it switched to Air. Now I am playing DSD64 upsample through ethernet without a glitch. Just a curiosity, does anyone know what is the new icon over the dB letters on the screen? Looks like a barred square. RE: Firmware 12.3.0 + DOS 2.2.2 - Dannythered - 16-Jun-2018 All working well for me, however just noticed that the dB symbol is flashing red now and again, what’s that all about? Listening via Roon/AIR, level -29.0dB RE: Firmware 12.3.0 + DOS 2.2.2 - ogs - 16-Jun-2018 (16-Jun-2018, 16:22)Dannythered Wrote: ...just noticed that the dB symbol is flashing red now and again, what’s that all about? Listening via Roon/AIR, level -29.0dB That might be an indication of digital 'overs' i.e. clipping on the input to your amplifier. For checking, enable Headroom Management for the Roon/AIR zone. Set Headroom Adjustment (dB) to 0 (zero) and enable Show Clipping Indicator. If Roon now indicates clipping simultaneous with the dB symbol in the amp you are seeing digital clipping. Are you using any other DSP functions in Roon? EQ or Convolution? Upsampling maybe? RE: Firmware 12.3.0 + DOS 2.2.2 - Hifi_swlon - 17-Jun-2018 Is there any info / release notes about the latest? I didn’t see anything in the Core Infinity Log, perhaps that’s been abandoned. I actually ordered the CI upgrade tonight, but then started getting cold feet and wondered whether I’ll actually ship it. I’d be really upset if I got stuck with something not working properly- seems unlikely if all I’m using is aes (and testing airplay/Spotify), but... RE: Firmware 12.3.0 + DOS 2.2.2 - Axel - 17-Jun-2018 (17-Jun-2018, 00:31)Hifi_swlon Wrote: Is there any info / release notes about the latest? I didn’t see anything in the Core Infinity Log, perhaps that’s been abandoned. I think you should go for it. The AES/EBU input is working as it should. In fact, I think just about everything is working properly! RE: Firmware 12.3.0 + DOS 2.2.2 - Dougiet - 17-Jun-2018 I know what you mean Hifi_swlon, I too have been waiting for quite a while, patiently, for the first post „Official Release“....... normally I’m not afraid of Beta software, in fact it’s almost a standard now that the next update is already being prepared, it’s just mega complicated, too many preambles to get right for everyone. I ordered, finally, my upgrade midday on Thursday, Friday UPS picked up my Devialet and expected delivery time in France, (from Germany) is Monday! A big thank you too all you beta testers on DC, as always you were a great source of input for doubters like me! RE: Firmware 12.3.0 + DOS 2.2.2 - Graham - 17-Jun-2018 (17-Jun-2018, 00:31)Hifi_swlon Wrote: Is there any info / release notes about the latest? I didn’t see anything in the Core Infinity Log, perhaps that’s been abandoned. The release notes are included in the download. I posted a link in #48. RE: Firmware 12.3.0 + DOS 2.2.2 - Chris Marshall - 17-Jun-2018 The number of people reporting problems with streaming now seems to have reduced to a small number which makes it most likely local network issues. They seem to happen to any platform, even with Roon RAAT and various end points there are issues raised on the Roon forum so I think it’s close to impossible to guarantee 100% trouble free consumer network streaming due to all the variables. My CI has been rock solid for the last 2 betas and now the official release, the closest I can find to an annoyance are the Roon volume not working until the song actually starts and not being able to disable the unused WiFi input. If you have a working solution today there is of course little pressure to update so waiting longer doesn’t harm but I don’t think there is much risk doing it now. My one recommendation would be to check the condition of your amp and photograph it before shipping it as mine returned with a very small mark that I can’t see how it was there before. Devialet rang me to say it was there whilst they had it but I am pretty sure it wasn’t when it left me. Cheers Chris |