Configuring preamp out with D440 XLR - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Support Desk (https://devialetchat.com/Forum-Support-Desk) +--- Thread: Configuring preamp out with D440 XLR (/Thread-Configuring-preamp-out-with-D440-XLR) |
Configuring preamp out with D440 XLR - agentsmith - 05-Sep-2018 Friend is planning to bring over a poweramp with balanced XLR inputs only to try out with my D440. I tried configuring the 2 AES outputs as Preout, but it seems it can only be activated if I also configure 2 RCA outputs as preout. Since I have not tested it I am not sure if it will work. Can anyone confirm if the 2 AES outputs works as preout Configuring preamp out with D440 XLR - Elztalbiker - 05-Sep-2018 I think the AES are only inputs for digital. Analog outputs only RCA Gesendet von iPad mit Tapatalk RE: Configuring preamp out with D440 XLR - Pim - 05-Sep-2018 (05-Sep-2018, 06:37)Elztalbiker Wrote: I think the AES are only inputs for digital. Analog outputs only RCA That's right. I just checked on the configurator. RE: Configuring preamp out with D440 XLR - agentsmith - 05-Sep-2018 (05-Sep-2018, 06:58)Pim Wrote:(05-Sep-2018, 06:37)Elztalbiker Wrote: I think the AES are only inputs for digital. Analog outputs only RCA But it seems there is an option to enable preout? RE: Configuring preamp out with D440 XLR - thumb5 - 05-Sep-2018 The "Sub/Preout enabled" option defines whether the sub/pre output is turned on when the amp is playing input from the source you're currently configuring. RE: Configuring preamp out with D440 XLR - agentsmith - 07-Sep-2018 (05-Sep-2018, 14:32)thumb5 Wrote: The "Sub/Preout enabled" option defines whether the sub/pre output is turned on when the amp is playing input from the source you're currently configuring. Thanks, so i guess the XLR can only be used for digital input. RE: Configuring preamp out with D440 XLR - tom539 - 07-Sep-2018 Hello, I have raised a ticket for that question in march 2017 - here the answer from Devialet: Océane (Devialet) Mar 6, 17:50 HKT Dear Thomas, Thank you for your message. Only our spdif can be configured for some in pre out. This is today the only way to connect a headphone to our amplifier. The AES only receives signal via IN. Best regards, Océane | Customer service & support Devialet I want to connect my headphone-amp via two XLR-monos... ATB, tom RE: Configuring preamp out with D440 XLR - Dan - 24-Nov-2020 Anybody know if this still true today? |