Direct Optical mode - How to - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: Direct Optical mode - How to (/Thread-Direct-Optical-mode-How-to) |
RE: Direct Optical mode - How to - Teliaved - 26-Jun-2019 If you're not in a hurry, the new app coming to the premier, including the gold phantoms, should Mark the end of life of the dialog box. You should then get what you want. I have no idea if the direct optical mode will remain. With my pair of reactors, the lag with the TV is not perceptible. RE: Direct Optical mode - How to - njaiswal - 26-Jun-2019 (26-Jun-2019, 00:17)Teliaved Wrote: If you're not in a hurry, the new app coming to the premier, including the gold phantoms, should Mark the end of life of the dialog box. You should then get what you want. I have 2 cases open with Devialet to have them give me a fix to enable direct optical mode on my reactors. In my environment, stereo is very unstable and is very hit or miss... I'll let you all know what happens. Right now the situation is so bad that my wife wants to get rid of all the reactors... :-( RE: Direct Optical mode - How to - Vayce - 21-Aug-2019 Hi, Im new Here and i own 2 Golds with a Dialog. As i have read, it is possible to sync the Golds With other Sonos speakers when using a Sonos Connect and a toslink Splitter, so the 160ms are no Problem anymore. In another Forum with other speakers it was Not possible to get the Same loudness at the Sonos speakers and the speakers connected at the toslink Out Of the Sonos Connect. Has someone a Setup with some Phantoms, connected To a Sonos Connect, using other Sonos Speakers an could Tell me that it is possible to get a balanced loudness between all the speakers? I want to controll the loudness with the Sonos App, While having a Setup of 2 Golds L/R, a Sonos Beam AS center, and 2 Sonos One as Rearspeakers. I want to listen to Music in Stereo only with the Golds, But i also want to Play Games in 5.0 Surround without Having any lag of Audio. Hope you can Tell me If this is possible, and a Sonos Connect might fix my Problem. Sry for my Not skilled english, schools Out a Long Time ago Greetings, Michael Btw. The new App, would it fix the Problem maybe, And ist it usefull to buy a Sonos Connect or ist it netter To wait for the new App? RE: Direct Optical mode - How to - njaiswal - 22-Aug-2019 (26-Jun-2019, 02:22)njaiswal Wrote:Hi! I forgot about this thread. I worked with Devialet's custom install manager and an AV integrator to purchase Dante adapters for my phantoms (Premieres and Classics). So far everything has been rock solid with this configuration.(26-Jun-2019, 00:17)Teliaved Wrote: If you're not in a hurry, the new app coming to the premier, including the gold phantoms, should Mark the end of life of the dialog box. You should then get what you want. RE: Direct Optical mode - How to - Luvdac - 14-Oct-2019 Thank you to Alandbush for this thread. Putting both golds into direct optical mode has solved the maddening issue of phantoms losing the signal everytime the power goes on the blink here in India. Even line level power back ups weren't able to help. Now, the music flows without interruptions, and the power back ups are effective. At first the powered optical splitter ( one of those cheap powered 20$ ones) would supply only one phantom with the signal. Swapped out the supplied wall wart and plugged in a linear psu ( hdplex) and the problem went away. Hope this helps someone out there who is struggling with splitter issues. RE: Direct Optical mode - How to - da2001 - 17-Dec-2019 today i wanted to bring my phantom golds in direct optical mode, because i am tired of the issues. i want to use them for tv, so DOS2 is no option. i cant connect them by bluetooth anymore, so i cant enter optical direct mode. i saw in the forum that there is a firmware fix, so i contacted the support to get rid of my old 1.14.0.18. They told me it will take around a week to get this update.. wow. so disappointed. again. RE: Direct Optical mode - How to - alexis0587 - 25-Dec-2019 Hello All, Is the process the same for DOS2 than DOS1 to put Phantom in Direct mode ? This mode works well for me in DOS1 and I reflex the pro and cons to upgrade to DOS2. Thanks RE: Direct Optical mode - How to - ragwo - 26-Dec-2019 (25-Dec-2019, 23:03)alexis0587 Wrote: Hello All,At the moment direct optical mode doesn't work in DOS2. If you rely on it you shouldn't upgrade. RE: Direct Optical mode - How to - Luvdac - 23-Sep-2020 Well I seem to have made a mess of things. I reset my phantoms from optical direct to factory settings and now I can't put them back into optical mode. When I open up the app it finds the speaker but is asking me to upgrade to the latest dos 2. It won't let me get past this upgrade page. Anyone here has workaround? RE: Direct Optical mode - How to - ofrappier - 23-Sep-2020 (26-Dec-2019, 00:35)ragwo Wrote:(25-Dec-2019, 23:03)alexis0587 Wrote: Hello All,At the moment direct optical mode doesn't work in DOS2. If you rely on it you shouldn't upgrade. ??? see at Devialet website : This release includes the following improvements (compared to DOS 2.10.0):
|