Direct Optical mode - How to - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: Direct Optical mode - How to (/Thread-Direct-Optical-mode-How-to) |
RE: Direct Optical mode - How to - ragwo - 23-Sep-2020 (23-Sep-2020, 14:38)ofrappier Wrote:At the time I wrote the post, 26th of December 2019, DOS2 didn't support optical direct mode. 2.11.2 with optical direct mode was released a couple of weeks ago. In DOS2 you'll have to press the button on the back of the speaker five times to enable the optical direct mode. A user reported that his Phantom reverted to normal mode by itself after some time, so it seems like it's not 100% yet.(26-Dec-2019, 00:35)ragwo Wrote:(25-Dec-2019, 23:03)alexis0587 Wrote: Hello All,At the moment direct optical mode doesn't work in DOS2. If you rely on it you shouldn't upgrade. RE: Direct Optical mode - How to - ragwo - 23-Sep-2020 (23-Sep-2020, 14:15)Luvdac Wrote: Well I seem to have made a mess of things. I reset my phantoms from optical direct to factory settings and now I can't put them back into optical mode. When I open up the app it finds the speaker but is asking me to upgrade to the latest dos 2. It won't let me get past this upgrade page. Can you disconnect your router from the internet so the app can't check for updates? RE: Direct Optical mode - How to - ofrappier - 23-Sep-2020 "In DOS2 you'll have to press the button on the back of the speaker five times to enable the optical direct mode. A user reported that his Phantom reverted to normal mode by itself after some time, so it seems like it's not 100% yet." Hi, Strange, i've done that and seems to work on my Reactor... too. (lower latency in optical than the 60ms displayed in menu) I will investigate more RE: Direct Optical mode - How to - mingfang - 23-Sep-2020 (23-Sep-2020, 23:49)ofrappier Wrote: "In DOS2 you'll have to press the button on the back of the speaker five times to enable the optical direct mode. A user reported that his Phantom reverted to normal mode by itself after some time, so it seems like it's not 100% yet." @ofrappier can you please share the steps you took to enable optical direct mode? I tried multiple times by pressing the power button 5 times on different speakers Silvers and Reactor and it didn't work. RE: Direct Optical mode - How to - ofrappier - 24-Sep-2020 (23-Sep-2020, 23:59)mingfang Wrote:(23-Sep-2020, 23:49)ofrappier Wrote: "In DOS2 you'll have to press the button on the back of the speaker five times to enable the optical direct mode. A user reported that his Phantom reverted to normal mode by itself after some time, so it seems like it's not 100% yet." the correct name is "low latency optical mode" nothing change in menu, efter the 5 times, i will investigate with "RTA/Rew" measurements, in next days, my Reactors seems to be now lower than 60ms RE: Direct Optical mode - How to - Luvdac - 24-Sep-2020 (23-Sep-2020, 21:19)ragwo Wrote:(23-Sep-2020, 14:15)Luvdac Wrote: Well I seem to have made a mess of things. I reset my phantoms from optical direct to factory settings and now I can't put them back into optical mode. When I open up the app it finds the speaker but is asking me to upgrade to the latest dos 2. It won't let me get past this upgrade page. Tried that. Same result. Wont let me get past the update page. RE: Direct Optical mode - How to - quartz78 - 24-Sep-2020 (24-Sep-2020, 04:02)Luvdac Wrote:(23-Sep-2020, 21:19)ragwo Wrote:(23-Sep-2020, 14:15)Luvdac Wrote: Well I seem to have made a mess of things. I reset my phantoms from optical direct to factory settings and now I can't put them back into optical mode. When I open up the app it finds the speaker but is asking me to upgrade to the latest dos 2. It won't let me get past this upgrade page. Try uninstalling / reinstalling the app. It may have entered some strange state so you need to erase all the app local data. Also, do you have the latest app (1.12.1)? RE: Direct Optical mode - How to - Luvdac - 24-Sep-2020 (24-Sep-2020, 11:00)quartz78 Wrote:(24-Sep-2020, 04:02)Luvdac Wrote:(23-Sep-2020, 21:19)ragwo Wrote: Can you disconnect your router from the internet so the app can't check for updates? I ended up upgrading to dos2. I put in a post regarding my experience on that over at the dos2.11.3 thread. I havent put the phantoms into optical direct but pretty happy with the set up atm. Optical input and both phantoms linked with an ethernet cable. RE: Direct Optical mode - How to - aryelevin - 24-Sep-2020 But how to select the channel (L\R) for each speaker? RE: Direct Optical mode - How to - ragwo - 24-Sep-2020 (24-Sep-2020, 00:55)ofrappier Wrote:From the release note:(23-Sep-2020, 23:59)mingfang Wrote:(23-Sep-2020, 23:49)ofrappier Wrote: "In DOS2 you'll have to press the button on the back of the speaker five times to enable the optical direct mode. A user reported that his Phantom reverted to normal mode by itself after some time, so it seems like it's not 100% yet." Added support of direct optical mode for Phantom Premier (recommended for professional use only). Would be a great bonus if the Reactors are affected by the update. |