Pre-out to a Poweramp - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro) +--- Thread: Pre-out to a Poweramp (/Thread-Pre-out-to-a-Poweramp) |
Pre-out to a Poweramp - rondark - 26-Oct-2018 Expert Pro 220 CI Leaving aside why I might want to do this...has anyone gone from pre-out to a poweramp? I tried it and it worked but... I configured so the speakers were off and the and pre-out was enabled. The question is...why is the amp case as hot when the speakers were off as when they were on? Should I have turned the power output down to 30 watts in the speaker configuration panel? Just wondering. Cheers RE: Pre-out to a Poweramp - BrianT - 27-Oct-2018 (26-Oct-2018, 15:59)rondark Wrote: Expert Pro 220 CI rondarc I am doing the same at the moment, using my 220PRO CI as a preamp feeding a 75 w tube amp. I checked the temps of the Devialet after it had been on for 2 hrs. Amp A 33 Amp D 30 Supply 38 Hope this helps Brian RE: Pre-out to a Poweramp - chrisc - 27-Oct-2018 Its summer here and the indoor temperature has risen to 23 deg. The amp is always very warm, on or off. Now it is 7 deg hotter than usual. Being a very dry summer and a well-insulated house, we don't need an aircon RE: Pre-out to a Poweramp - rondark - 27-Oct-2018 (27-Oct-2018, 12:15)BrianT Wrote:(26-Oct-2018, 15:59)rondark Wrote: Expert Pro 220 CI Thanks Brian. I was curious about anyone else's experience. I am driving a tube amp as well. Cheers |