Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet News (https://devialetchat.com/Forum-Devialet-News) +--- Thread: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 (/Thread-Version-Firmware-13-1-3-DOS-2-2-4-Date-2019-02-12) |
Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - douglas - 12-Feb-2019 Hi, New firmware version is available for Expert PRO CI. I am busy upgrading, but it has been stuck on the DOS upgrade for several minutes now! Regards, Douglas RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - Drifter - 12-Feb-2019 Keen to hear your thoughts. The upgrade often takes a while. RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - G51 - 12-Feb-2019 (12-Feb-2019, 18:44)douglas Wrote: Hi, Thanks for telling us this good news! Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - Soniclife - 12-Feb-2019 Roon ready. Free roon licences when you buy experts. What else is in it? RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - blair.athol - 12-Feb-2019 Yes, Devialet is Roon Ready!!! RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - BoyScout - 12-Feb-2019 (12-Feb-2019, 19:11)Soniclife Wrote: Roon ready. Same question here. RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - AlexS - 12-Feb-2019 Changelog 13.1.3 + DOS 2.2.4 New features • Roon Ready Certification • Support for RAAT protocol (Roon Advanced Audio Transport) • Chaining : Extension to 16 units (instead of 8) for extreme configurations • Lower power consumption in sleep mode (around 1W) Fixed • IP address error when several Expert use DHCP on the same network • Compatibility with some SD card models during software update (similar to 2.2.3) Still being worked on • Devialet AIR: Windows instability • Devialet Remote App : Volume control is inactive before streaming starts RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - ada - 12-Feb-2019 Finally works: But Roon still says it is not certificated: RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - Drifter - 12-Feb-2019 The important questions are: 1) how does it sound 2) how stable is it RE: Version: Firmware 13.1.3 + DOS 2.2.4 Date: 2019-02-12 - deviousalet - 12-Feb-2019 Measuring a 220 Pro CI in factory configuration the power consumption went from 13W to 11W off or standby and 29W to 27W when idle from upgrading the firmware. Yay! This doesn't bring a true off mode nor reduce standby consumption to a modern level of <0.25W, but I'm happy for any efficiency improvement and am delighted that Devialet are trying. |