phantom .screw lock to stands - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: phantom .screw lock to stands (/Thread-phantom-screw-lock-to-stands) |
phantom .screw lock to stands - eladeb - 19-Jan-2020 Hi , can anyone clarify how can i lock phantom to generic stands ? i have my eye on the soundstyle z2 a cheap award stands. https://www.whathifi.com/soundstyle/z2/review the stands plate is 16.6cm on 12.5cm so i think its good enough for the phantoms. my problem here is how to secure it to the plate (little kids,dog etc... ) if it involved some more holes i can do it manually but there a grey plastic underneath the phantom and i can figure out if its detectable/screwble or whatever. please advise... Elad RE: phantom .screw lock to stands - ragwo - 19-Jan-2020 (19-Jan-2020, 17:07)eladeb Wrote: Hi ,It's a non detachable pin. You can make a bracket for securing the speaker. See attached drawing and picture of the original Devialet mounting solution. RE: phantom .screw lock to stands - ogs - 19-Jan-2020 (19-Jan-2020, 17:07)eladeb Wrote: Hi , I don't have Phantoms, but if you look at Gecko there is a small handle where a hook on the Phantom bottom (hidden under the rubber) slides in and holds the speaker. A bit of DIY is required on your part as the the stands are not original Devialet. Ah, @ragwo beat me to it! RE: phantom .screw lock to stands - eladeb - 19-Jan-2020 @ragwo @ogs Guys thanks a lot! Btw the drawin in pic no 2 is mm? RE: phantom .screw lock to stands - ragwo - 20-Jan-2020 (19-Jan-2020, 20:57)eladeb Wrote: @ragwo @ogsYes, it's in mm. RE: phantom .screw lock to stands - eladeb - 21-Feb-2020 Made my own plate. Il send some sketches i i did later one. (Can't attech via android to the the thread) RE: phantom .screw lock to stands - eladeb - 22-Feb-2020 (21-Feb-2020, 15:53)eladeb Wrote: Made my own plate.some pics attached. RE: phantom .screw lock to stands - eladeb - 26-Feb-2020 pics attached |