+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet Expert 400/800, Original d'Atelier, Expert 210/440/1000 Pro (https://devialetchat.com/Forum-Devialet-Expert-400-800-Original-d-Atelier-Expert-210-440-1000-Pro)
+--- Thread: d400 upload (/Thread-d400-upload)
d400 upload - hansweer - 17-Sep-2020
Hello , i have a devialet expert 200 for a few years and a few months ago i buyed a slave 200 extra so that i can make a 400 system.But i don't no how i do it but when i make a new configuration it will not go to the 400 modus ( in the configuration i click on the expert 400 button and make a configuration ) when i put the sd card into the devialet it will not go to 400 instead of 200 ! My old sd card cofiguration will go to 400 without any problem .what do i not right ? Maby someone of you have the right answer for me ! greetings , hans
RE: d400 upload - Pim - 17-Sep-2020
Hi Hans,
Welcome to the forum. Try there below. It's always worked for me. Usually, if it doesn't work, delete everything and start a new configuration from the start.
https://devialetchat.com/Thread-How-to-configure-your-Expert-Pim-and-Axel-s-method
Good luck!
Pim
RE: d400 upload - hansweer - 18-Sep-2020
(17-Sep-2020, 23:25)Pim Wrote: Hi Hans,
Welcome to the forum. Try there below. It's always worked for me. Usually, if it doesn't work, delete everything and start a new configuration from the start.
https://devialetchat.com/Thread-How-to-configure-your-Expert-Pim-and-Axel-s-method
Good luck!
Pim
Thank you for your quick answer , i will try it again.greet hans
RE: d400 upload - hansweer - 18-Sep-2020
I forgot to tell about our system , so here it is : we have a setup from the d400 with b&w 802 d2 speakers and a marantz sa 11s2 cd player and a transrotor phono , the pre-out from the d400 is connected with a marantz pm11s1 ampiflier who send the music to a pair of b&w 803d ( previous model ) for another area in the house.That is not working fine at all because of a nasty sound when the music stop ( you can here a low bass tone all the time ) the phono does the same : a nasty sound whitout playing
( ground is conneted )So now i'm looking for a better configuration. greetings hans
RE: d400 upload - kerkhoffd - 19-Sep-2020
I would first try and get the 400 to work, and only then experiment with the looping to another set elsewhere in the house. Not sure the pre out was intended for that setup.