SAM On or Off at Turn On? - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Speakers (https://devialetchat.com/Forum-Speakers) +--- Thread: SAM On or Off at Turn On? (/Thread-SAM-On-or-Off-at-Turn-On) |
SAM On or Off at Turn On? - wikeeboy - 25-Jan-2015 If you have your Devialet configured with a SAM profile, when you turn your Devialet on, is SAM 'on' as default or 'off'? Or is the default whatever it was before previous shutdown? SAM On or Off at Turn On? - Elztalbiker - 25-Jan-2015 Hey wikeeboy, turn on DEV and SAM it's on by default. Sent by iPad RE: SAM On or Off at Turn On? - wikeeboy - 25-Jan-2015 (25-Jan-2015, 12:44)Elztalbiker Wrote: Hey wikeeboy, turn on DEV and SAM it's on by default. Thanks for the reply. I have 2 sets of speakers in my lounge, one is SAM enabled, the other isn't. My Devialet is configured with the SAM profile of my SAM enabled speakers. So if i use the non enabled speakers, every time i turn the devialet on i will have to turn SAM 'off'? Does it not keep the last preset before you turned the devialet off? RE: SAM On or Off at Turn On? - Jean-Marie - 25-Jan-2015 (25-Jan-2015, 13:11)wikeeboy Wrote:In my opinion, the best thing would be to have two SDcard, one with the setting for each pair of speaker. When you swap speakers you also swap the SDCard and this way the Dev is always configured properly for the pair you have connected to it.(25-Jan-2015, 12:44)Elztalbiker Wrote: Hey wikeeboy, turn on DEV and SAM it's on by default. Jean-Marie RE: SAM On or Off at Turn On? - Dr Tone - 25-Jan-2015 (25-Jan-2015, 13:16)Jean-Marie Wrote:(25-Jan-2015, 13:11)wikeeboy Wrote:In my opinion, the best thing would be to have two SDcard, one with the setting for each pair of speaker. When you swap speakers you also swap the SDCard and this way the Dev is always configured properly for the pair you have connected to it.(25-Jan-2015, 12:44)Elztalbiker Wrote: Hey wikeeboy, turn on DEV and SAM it's on by default. I second this suggestion. As SAM will be on by default you don't want to forget and damage your other pair of speakers. SAM On or Off at Turn On? - Elztalbiker - 25-Jan-2015 Same like Jean-Marie >> 2 SDCards Sent by iPad RE: SAM On or Off at Turn On? - wikeeboy - 25-Jan-2015 Thanks for all of the replies! The problem i have is my Devialet is tucked away in my rack and it is very hard to easily/quickly swap SD cards (especially with big fat fingers like i have!). I'm not holding my breath but i am really hoping that new software will bring the following features: - Configurator modified live from the Devialet app (no need to use sd card) - All controls (tone, SAM, etc) usable via the app, not just the remote. As for using 2 separate sd cards/configurations, the only difference is the SAM profile. So long as i ensure SAM is 'off' when using my other speakers there should be no difference? Or am i missing something? RE: SAM On or Off at Turn On? - Dr Tone - 26-Jan-2015 Making sure SAM is off is all you need to do. RE: SAM On or Off at Turn On? - wikeeboy - 26-Jan-2015 Thanks Dr Tone. So i'll just have to hit SAM off every time the unit turns on. |