OdA Does Not Work

[Jp.]

My joy turned to a total disappointment!

Well, the OdA were returned, CI upgraded and both chassis & remote polished to a shine as good as new.

However, when the SD cards were redone - addition of a new tuner and a complete modded Oppo UDP-205 from Modwright, the right channel (S1) inputs has no sound at all, no matter the input - which in this case were my Stereo TT input, FM Tuner.

Tried re-doing the configurator like more than 10x (yes, 10x) the problem could not be resolved. When switching input from the Main to the S1 unit, that is the FM exchanging with Oppo, there is sound. This is also true when switching phono input to Mono from Stereo.

In the end, I am left with a pair of OdA that don't seem to work at all if using inputs from the right (S1). The last suspect is that connecting (smaller jack cable) could be "damaged". Dealer will try again on Mon with a new cable, and I certainly hope it will work. 

Anyone knows how to fix this as I don't think its there cable at fault. But being a novice, the only thing I culled do is wait and full of frustration. I hope someone is able to advise how I should proceed cause I am now left with a system I cannot use at all on one channel inputs.

Hi, you had your OdA polished like absolute brand new??? Mine came back with many swirl marks. Not happy.

But I don't have any other issue, i don't use any input from companion.

Hi,
1. No swirl marks. Shiny like new. In fact, was packed into 2 brand new O'dA paper boxes.
2. If Companion not used, should not have issue as its a problem only if one uses the companion inputs.
Cheers

Have a look at the balance setting, I've had a similar issue with my 1000 Pro after my girlfriend cleaned the remote while the system was on. One of the channels remained silent no matter what I tried, even swapping master and companion (I have 2 full 250 pro's) or configuring the units as a standalone 250 pro.