That’s what Google translates from @Lee inseok
Connect the speaker using the ADC connection method.
Before that, I used adc fixed at 24bit / 192khz, and it made a sound for about 5 or 6 seconds, and then I used it from the time I got the message to unplug the cable.
I tested it with 3 gold and 2 silver and it was the same.
Now, adc is a model called rme adi-2 fs that can set values, and after this firmware upgrade, I tried various values that I was curious about.
44.1, 48, 96 and 192 all worked fine, but on 132 the fiber was not connected.
Internally, we see how to measure processing value.
Connect the speaker using the ADC connection method.
Before that, I used adc fixed at 24bit / 192khz, and it made a sound for about 5 or 6 seconds, and then I used it from the time I got the message to unplug the cable.
I tested it with 3 gold and 2 silver and it was the same.
Now, adc is a model called rme adi-2 fs that can set values, and after this firmware upgrade, I tried various values that I was curious about.
44.1, 48, 96 and 192 all worked fine, but on 132 the fiber was not connected.
Internally, we see how to measure processing value.
