Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help weird issue
#1
Ok here's the problem. First off this is with a 200 and an Auralic Aries. I wanted to compare a very good coax spdif (RCA) digital cable to my very good USB cable. I've been using the digital 1 coax input for ages with a Sonos, zero issues. I've been using the USB input for ages with the Aries, zero issues. I've also used the AES/EBU on the 200 and with the Aries zero issues. 

So I hooked up the coax out of the Aries to digital 1 on the 200, and it plays 16/44 fine but total silence with Hi-Res files. The Aries shows it playing the files.. WTF!  

Any ideas?? Switch back to USB no problems.. It's as if the Digital 1 input can't decode hires??

Again WTF Is going on? Ideas anyone..
Reply
#2
Your hi-res files are 24bit? If so, a mystery, the SPDIF input should work without issue. If the files are being output as DSD, then this will result in silence.
Reply
#3
(23-Apr-2015, 21:17)Confused Wrote: Your hi-res files are 24bit?  If so, a mystery, the SPDIF input should work without issue.  If the files are being output as DSD, then this will result in silence.

Yup 24/96 and 24/192  Yes it's a mystery.. I put a call in to Audio Plus Services.. see if they have any ideas.. 
Reply
#4
So the plot thickens.. I can play 24/96 files but not 24/192 it sort of stutters if it plays at all.
Reply
#5
And I sent a email to Devialet..It's not the end of the world but I'd like to understand why coax won't do 24/192
Reply
#6
coax should play 24/192. Optical/toslink no.


从我的 iPhone 发送,使用 Tapatalk
Before: Le200, KEF LS50, AQ Type4, NUC 5i5RYH/8GB/128GB M.2SSD, Roon, Win8.1/AIR2.1.3/RoonBridge, MM/AIR3/RoonBridge, QNAP TS-212P 5TB NAS, AQ NRG-X3

Now: KEF LS50W, NUC5i5RYH/8GB/128GB M.2SSD, Roon, QNAP TS-212P 5TB NAS,iFi iSilencer3.0+DC iPurifier+iPurifier2, Sonos ZP80+SPDIF iPurifier


Location: Cyberjaya, Malaysia
Reply
#7
(24-Apr-2015, 02:59)hk6230 Wrote: coax should play 24/192. Optical/toslink no.


从我的 iPhone 发送,使用 Tapatalk

Yes I know that.
Reply
#8
Check your configurator and see if you accept 24/192 for digital input


从我的 iPhone 发送,使用 Tapatalk
Before: Le200, KEF LS50, AQ Type4, NUC 5i5RYH/8GB/128GB M.2SSD, Roon, Win8.1/AIR2.1.3/RoonBridge, MM/AIR3/RoonBridge, QNAP TS-212P 5TB NAS, AQ NRG-X3

Now: KEF LS50W, NUC5i5RYH/8GB/128GB M.2SSD, Roon, QNAP TS-212P 5TB NAS,iFi iSilencer3.0+DC iPurifier+iPurifier2, Sonos ZP80+SPDIF iPurifier


Location: Cyberjaya, Malaysia
Reply
#9
There is no where in the configurator that allows that kind of choice. The Spdif inputs are either on or off.
Reply
#10
Yes there is


从我的 iPhone 发送,使用 Tapatalk
Before: Le200, KEF LS50, AQ Type4, NUC 5i5RYH/8GB/128GB M.2SSD, Roon, Win8.1/AIR2.1.3/RoonBridge, MM/AIR3/RoonBridge, QNAP TS-212P 5TB NAS, AQ NRG-X3

Now: KEF LS50W, NUC5i5RYH/8GB/128GB M.2SSD, Roon, QNAP TS-212P 5TB NAS,iFi iSilencer3.0+DC iPurifier+iPurifier2, Sonos ZP80+SPDIF iPurifier


Location: Cyberjaya, Malaysia
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)