Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FW 8.0.0 1 channel only phenomena
#11
Have you tried to turn DPM off? I tried that yesterday and that seemed to solve the problem in my set up.
Bluesound Node > Matrix Audio X-SPDIF 2 > Genelec 8351B & 7360A
Devialet 1000 Pro
Bluesound Node 2i > Genelec 8330
Tampere, Finland
Reply
#12
(25-May-2015, 06:35)petrik Wrote: Have you tried to turn DPM off? I tried that yesterday and that seemed to solve the problem in my set up.

Yes I did from the start with 8.0.0 and the config so from that outset I had the one channel problem.

I am staying with 7.1.3 until Dev release 8.x.x etc.

/Mike
Ex D400 Now Aavik U-300/Feickert Woodpecker2-Kuzma 4P-Kondo silver-Benz LPS-Teddy Pardo PSU/Naim Unitiserve-Teddy Pardo PSU/SF Guarneri Homage/Whole system decoupled by Ansuz DTC/Cables from Ansuz, DYI and other commercial/Dedicated mains and spur-Lampizator SILK
Reply
#13
(25-May-2015, 06:45)Mikeeo Wrote:
(25-May-2015, 06:35)petrik Wrote: Have you tried to turn DPM off? I tried that yesterday and that seemed to solve the problem in my set up.

Yes I did from the start with 8.0.0 and the config so from that outset I had the one channel problem.

I am staying with 7.1.3 until Dev release 8.x.x etc.

/Mike

Ok, well let's then wait for a new FW version and hope for the best. I asked when the new FW will be released but they couldn't say any exact date for that.
Bluesound Node > Matrix Audio X-SPDIF 2 > Genelec 8351B & 7360A
Devialet 1000 Pro
Bluesound Node 2i > Genelec 8330
Tampere, Finland
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)