Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Kef LS50 vs Atohm GT1 SE
#11
(18-May-2018, 05:14)K4680 Wrote: Hello, Atohm speaker GT 1 Special Edition this one was developed together with Devialet, for the Le 120. Was also offered as a set!
http://www.hifichoice.co.uk/news/article...6290/20460

Thanks. I know the SE was developed with Devialet, and offered as part of the Ensemble package, but I wanted to know about the differences between the SE and the HD versions of that speaker. I haven't been able to find any info on the difference, at least not yet.
Damon
W4S modified Sonos Connect & VPI HW19 mkIII into a D220 Pro CI, capably carried by Analysis Plus Oval 9 speaker cable, and thence made expansive by Lawrence Audio Violin SE speakers, and juiced by power cords and coax cables from Nordost in decorator colors.
At the office: NuPrime IDA-16 into Amphion Argon 1, QED cable, ordinary Sonos Connect
Vancouver, Canada
Reply
#12
(04-May-2017, 07:40)Emerald Wrote: Which one is better in a small room ?


GT1 Easily better than LS50
Reply
#13
(18-May-2018, 21:54)Damon Wrote:
(18-May-2018, 05:14)K4680 Wrote: Hello, Atohm speaker GT 1 Special Edition this one was developed together with Devialet, for the Le 120. Was also offered as a set!
http://www.hifichoice.co.uk/news/article...6290/20460

Thanks. I know the SE was developed with Devialet, and offered as part of the Ensemble package, but I wanted to know about the differences between the SE and the HD versions of that speaker. I haven't been able to find any info on the difference, at least not yet.

Hello Damon, the only difference could be the tuning of the crossover. The chassis, housing, etc. are the same.
Devialet 220Pro-CI, Focal Sopra 3, Linn Klimax DS/Katalyst, Burmester 089 CD, Melco N1Z (Drive Buffalo BRXL-16U3), Cable Audioquest (NRG-10,Diamond,K2,Yukon,Coffee etc.), iPad-Pro, KECES P8 Dual, Qobuz Sublime+, Tidal HiFi
IsoTek: 2 x EVO3 Genesis One, EVO3 Titan One, EVO3 Syncro.                                                                                                                                                                Germany / Bavaria
Reply
#14
@Damon The Devialet SE model has a rear mounted reflex port. The HD reflex port is in the bottom of the cabinet, hence the base plate for air-flow. I also believe the HD has a different internal damping arrangement. Drive units should be the same, but there may be differences in the crossover as K4680 mentions.
I think you'll find some images if you look in the DIY section of Atohm's web site.
*
microRendu 1.4::LPS-1::USPCB::Mutec MC-3+USB::250 Pro CI::Roon life, Core on Intel NUC with Debian Linux, music on USB3 disk::Audiolense 5.1::Monitor Audio MA201 (thoroughly rebuilt, now with a SAM profile)


Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)