Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"dp_cfg.txt" Library
#1
Following the discussion we had in this thread http://devialetchat.com/Thread-Master-sl...nk?page=18

i am starting this thread as a library where members can share a brief description of properly functioning config files. Others who have the same system and would like to use the same config files can reach out on PM and ask for copy by email
Aurender X100L / Transrotor Crescendo TT / Denon DCD1520 / Macbook Pro >> D400 >> Martin Logan Montis
amabrok's system - Latest update (May 2015, Page 11, Post #109)

Dubai, UAE
Reply
#2
copied from my post 25 in the Yet another Dual Mono Configuration Glitch! thread

I have configuration files for D800 with the following inputs:_
Master
Air labelled iMac
Default MM input (I use a matching transformer with my MC cartridge) labeled Goldmund.
Ethernet
USB
bypass input labelled TV
AES labelled Mimesis 36+
SPDIF labelled Control 15
Optical 1 labelled A&K 240
Companion
Analogue input default gains, labelled Lynx Theta
Sub output with maximum gain (my sub has to live with 109dB/watt mains)

Anybody wanting use of these input (or less I don't use the ethernet or USB myself) is welcome to a copy of this config which works fine here. The biggest limitation would you would have to change your wifi network name and password to mine...
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire

Reply
#3
I've done lots of 800 dual mono configs to support 5 different speakers with or without a subwoofer; plus one active speaker I thought about; plus 2 SAM speakers; plus electrostatic headphones; with quite a few inputs.

The dual mono configurator with the RCA/XLR link doesn't currently work without using a workaround; plus (though probably not a config issue) I get white noise on both wifi and ethernet fed from a MacBook Pro.

1 Transducers

(a) passive loudspeakers
(i) Magico Q1: 46Hz - 25kHz @+-3db and 39Hz @-6dB
(ii) KEF LS50: 79Hz - 28kHz @+-3dB and 47Hz @-6dB
(iii) CML Etude: not disclosed
(iv) Boenicke W5: not disclosed
(v) Rogers LS3/5a: 68Hz - 20kHz @+-3dB and 55Hz @-6dB

(b) active loudspeakers
(i) Pluto Ultimate: 40Hz - 16kHz @+-3dB and 32Hz @-6dB

© active subwoofer via amplifier
(i) Wilson Benesch Torus: 10Hz - 150Hz @not disclosed and 18Hz @-6dB

(d) SAM loudspeakers
(i) Magico Q1: 16Hz @-6dB
(ii) KEF LS50: 29Hz @-6dB

(e) electrostatic headphones via amplifier
(i) Stax SR009

2 Configurations/Crossovers to deploy

1 Q1 or LS50 with Torus; or alone
(a)(i) or (a)(ii) plus ©(i): 4th order high pass and low pass 45Hz/55Hz;
or (a)(i) or (a)(ii) alone with no filtering

2 Etude or W5 or LS3/5a with Torus; or alone
(a)(iii) or (a)(iv) or (a)(v) plus ©(i): 4th order high pass and low pass 60Hz/75Hz
or (a)(iii) or (a)(iv) or (a)(v) alone with no filtering

3 Pluto with Torus; or alone
(b)(i) plus ©(i): 4th order high pass and low pass 30Hz/35Hz
or (b)(i) alone with no filtering

4 SAM Q1 with Torus; or alone
(d)(i) plus ©(i): low pass 30Hz
or (d)(i) alone with no filtering

5 SAM LS50 with Torus; or alone
(d)(ii) plus ©(i): low pass 30Hz
or (d)(ii) alone with no filtering

6 Q1 or LS50 or Etude or W5 or LS3/5a; or headphones
(e) plus any (a): passive loudspeaker plus electrostatic headphones

7 SAM Q1 alone simplified
(d)(i) alone with no filtering

4 Common settings - changes from default
1 - advanced configurator
2 - device = 800
3 - description = custom (NO LONGER DEFINABLE)
4 - chaining settings = chaining input, not shared sources
5 - chaining link = aes/ebu slave
6 - sub on slave = pre-out stereo
7 - general settings, remote: button 2 = pre-out; remote count = 2
CANNOT DO STEP 7: REMOVE COMPANION, ADD 250, GO TO STEP 4
8 - aes/ebu name = CYRUS CD
9 - line 1 name = QUAD TUNER; max level = 1.0Vrms
10 - optical1 name = PURE RADIO
11 - optical 2 name = MACBOOK PRO DSP
12 - usb name = DSPEAKER
13 - ethernet name = MACBOOK PRO(E)
14 - wifi name = MACBOOK PRO(A); password = xxxxxxxxx
15 - digital 2 = disabled
16 - phono 2 = disabled

Anyone wanting any one of these just ask. Again the wifi is based on my network name and password.
Innuos Statement 2TB SSD with Next-Gen PSU (with Roon lifetime)
MacBook Pro (with Air)
Draytek Vigor 2860v-Plus/Devialet Original d'Atelier CI Nos. 54A&B/Magico M3 pair
Shunyata cables (digital/interconnect/loudspeaker/power)/Shunyata power units (Triton/Typhon)

 Dialog/Phantom Gold/Tree pair
Missing Link cables (power)
England
Reply
#4
D400 Dual Mono Configuration

* Master/Slave Link: RCA-RCA

* General Settings:
01-General (all default except Use Last is off and Startup Source is set to USB)
02-Display: Default
03-Balance & Tone Control: Default

* Remote Settings: Default

* Master Inputs Setting:
01- Wifi: On (all default setting except Devialet Name set to MyD400, and network SSID and PW set to my network)
02- Brown Noise: On (Default)
03- Ethernet: Off
04- USB: On (Default)
05- Optical 1: Off
06- Phono 2: Off
07- Line 1: On (Default)
08- Digital 2: On (Default)
09- AES/EBU: Off
10- Optical 2: Off
11- Trig In: Off

* Slave Inputs Setting: Sharing input disabled

*Speakers:
01- Mono/Stereo: Mono (Default)
02- SAM: None
Aurender X100L / Transrotor Crescendo TT / Denon DCD1520 / Macbook Pro >> D400 >> Martin Logan Montis
amabrok's system - Latest update (May 2015, Page 11, Post #109)

Dubai, UAE
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)