12-Oct-2015, 12:37
I've seen a few conflicting posts on how to reset the system....none worked for the problem I had.
Devialet provided the following which worked first time. Maybe a mod could pin this post.
May I suggest you to make the reset this way:
Code:
Unplug the ELECTRIC cable of following products: Phantom, Dialog, Internet router, WiFi router or Airport.
After everything is unplugged please WAIT 30 SECONDS.
Then, replug the devices in FOLLOWING order:
1/ Internet router, wait that it’s COMPLETELY started
2/ Airport or other wifi router, wait that they are COMPLETELY started
3/ Dialog. Wait that the white light becomes stable white. Press 3 times on the white light. It should blink. Wait that the white light becomes stable white.
4/ Your Phantoms. Once plugged, press 3 times on the button of their back. You should hear the sound of a snap and the ears should wiggle. If not, press again 3 times on the button until your hear the sound of a snap.
5/ Wait that the Phantoms are „singing“
6/ Start Spark app and follow EXACTLY the steps shown on Spark
7/ If you have a remote, you can connect it now
Devialet provided the following which worked first time. Maybe a mod could pin this post.
May I suggest you to make the reset this way:
Code:
Code:
TOTAL RESET
Unplug the ELECTRIC cable of following products: Phantom, Dialog, Internet router, WiFi router or Airport.
After everything is unplugged please WAIT 30 SECONDS.
Then, replug the devices in FOLLOWING order:
1/ Internet router, wait that it’s COMPLETELY started
2/ Airport or other wifi router, wait that they are COMPLETELY started
3/ Dialog. Wait that the white light becomes stable white. Press 3 times on the white light. It should blink. Wait that the white light becomes stable white.
4/ Your Phantoms. Once plugged, press 3 times on the button of their back. You should hear the sound of a snap and the ears should wiggle. If not, press again 3 times on the button until your hear the sound of a snap.
5/ Wait that the Phantoms are „singing“
6/ Start Spark app and follow EXACTLY the steps shown on Spark
7/ If you have a remote, you can connect it now