+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Support Desk (https://devialetchat.com/Forum-Support-Desk)
+--- Thread: Red LED on rear panel (/Thread-Red-LED-on-rear-panel)
Red LED on rear panel - tyefighter - 17-Dec-2015
Hi guys I tried to do a search for this but couldn't find an answer
I have a D400 and last night I noticed that the Red LED on the rear panel of the 'Master' between the optical in and trigger is illuminated, while the 'Slave' LED is not
Next to the LED is a Hazard symbol, so my guess is that it's an error or fault with the Master unit?
any help is appreciated
RE: Red LED on rear panel - thumb5 - 17-Dec-2015
I'd always thought the red LED was a power-on indicator -- it seems to be permanently lit on my 400 master (can't remember for the slave but I assume so too).
This thread may be of interest: http://devialetchat.com/showthread.php?tid=1031 (although hopefully no cause for concern if your system is working properly).
Are any faults reported if you select the info display?
RE: Red LED on rear panel - McMo - 17-Dec-2015
Hi,
asked eaxctly the same question to Devialet´s helpdesk a few months ago.
According to them the red LED does only indicate that the unit is under power!
Doesn´t really make sense to me as I guess everybody would unplug the mains cable before opening the
amp but that´s what they told me...
RE: Red LED on rear panel - tyefighter - 17-Dec-2015
cheers for your replies guys
I saw that thread last night and also checked the faults report but there are no faults registered
It makes sense that its simply a power indicator but just seems a little weird that the Master is illuminated and not the Slave
RE: Red LED on rear panel - deviousalet - 25-Mar-2016
With the 3.5mm trigger cable connected between my D400 units (firmware 9.0.1) the LED is lit on both the master and slave units.
RE: Red LED on rear panel - tyefighter - 01-Apr-2016
thats interesting
i do have a 3.5mm cable but it is a generic cheapo cable... do you think there is any issue using a low quality cable?
i dont see why not as its not carrying any sounds after all
RE: Red LED on rear panel - deviousalet - 02-Apr-2016
I haven't tried anything but the stock cheap 3.5mm trigger cable and would be extremely surprised if changing that cable made any difference, but I've been surprised before so if anyone is willing to try I'm willing to listen.