Posts: 38
Threads: 8
Joined: Jul 2014
Reputation:
0
09-May-2015, 09:38
(This post was last modified: 09-May-2015, 09:39 by kjj11.)
Trigger is off
Companion inputs disabled
Thanks, I'll try to set a new Config files
But if I try setting all new Devialet 200 Config - I'll see Wrong Config files, so, this is very very strange
Maybe I also reformatting my SD-cards
Posts: 38
Threads: 8
Joined: Jul 2014
Reputation:
0
I'll create all new Configs & reformat cards. Nothing changes - Phono input missing link and non-active
Posts: 38
Threads: 8
Joined: Jul 2014
Reputation:
0
I partially ( ? ) isolate the problem - it looks like the groung resistor on RCA SPDIF link on Master Devialet is burned
Companion have the ground though SPDIF or XLR AES / EBU control link - but the Master is not - as a result, Master does not give link and Companion switched off for each analog input (LIne, Phono is not visible). But Wi-Fi or Usb works fine
If I'll connected unused inputs LINE on Master with the LINE on the Companion usual RCA-pair cables - earth turns again on and analog inputs are activated. So, with that link (RCA-RCA on SPDIF link & RCA-RCA on Line inputs) I may hear sound on Phono inputs and all looks like okey
Maybe this will help in the understanding of what to do. I think I'll need repair a connectors board on Master Devialet
Posts: 1,066
Threads: 38
Joined: Nov 2014
Reputation:
9
Sorry to hear that but at least you had the problem isolated.
Send your master back to your danger for repair.
Meanwhile the slave can be configured as a stand alone stereo D200 until the master unit is back
Sent from my iPhone using Tapatalk
Posts: 38
Threads: 8
Joined: Jul 2014
Reputation:
0
09-May-2015, 21:41
(This post was last modified: 09-May-2015, 21:52 by kjj11.)
Sorry, but if I change input to "problem" (Line, Phono, Ethernet) - without signal etc (orange indication) - my Companion unit is immediately switch off
I'll try diffirent link cables - nothing helps
So, this is the problem
And it seems this is not a hi-res streaming etc problem (I'll cannot do anything - I'll change input and my Companion Devialet is off and indicates Link None) - this is hardware failure
So, if I connect Line input on Master to Line Input on Companion via basic RCA cables -Phono, Ethernet works fine